KEKAI KTP2080 User Manual page 21

4.Set open-window detection
1). Press"
until stable.
2). Press" "button by remote control,light "
display"23"by default.Press"
decreased detected, the product will stop working. Then press "
product.
3).Press " " button again to turn off the open-window detection, the light "
go off and the product will resume to previous working mode.
Below is an example to set 23℃ during open-window detection.
4).When turn on open-window detection and weekly program at the same time, during the
OFF period of weekly program, the product doesn't work. During the working status of
weekly program, the temperature is subject to the setting temperature of open-window
detection. Below is a example:
Note:
- Before turn on weekly program: it must set working day and time period(P1-P6) ,
otherwise the weekly default state is "00", the product does not work.
"button，the product enter into working status. Heating for a moment
/ "button to set target temperature. If temperature
/ " is on; The temperature
"button to turn on the
"will