Page 2
www.robot-coupe.com Register your product on line...
Page 3
EU Declaration of Conformity Robot-Coupe® SNC declares that all the machines subject of these original • the provisions of the following harmonized European standards and the instructions, as well as their accessories and their packaging, comply with: standards specifying the safety and hygiene requirements: - EN ISO 12100:2010 Safety of machinery –...
SUMMARY WARRANTY MAINTENANCE • Blade IMPORTANT WARNING • Motor seal INTRODUCTION TO YOUR • Locking washer assembly NEW EMULSIFIER-MIXER Blixer 2 • ® • Scraper arm Blixer 3 • Blixer 4 • Blixer 4 V.V. ® ® ® TECHNICAL SPECIFICATIONS SWITCHING ON THE MACHINE •...
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements SHIPPING DAMAGES. Visible and latent for blades which have become blunt, chipped or defects are the responsibility of the freight car- Your new ROBOT-COUPE appliance is war- worn after a normal or excessive period of use. rier.
Page 6
RECOMMENDATIONS CONCERNING THE INSTALLATION OF VARIABLE-SPEED APPLIANCES AND PERSONAL SAFETY These recommendations apply to machines equip- • You must connect the machine to a 200-240 V / • Several variable-speed appliances are connected to the same GFCI. ped with an induction motor and a single-phase 50 or 60 Hz single-phase* alternating current sup- •...
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly.
GREEN YELLOW is the earth, INTRODUCTION TO YOUR W A R N I N G DO NOT DISCONNECT NEW EMULSIFIER-MIXER This appliance must be plugged into an Swap either : the ➊ and the ➋ Blixer 2 • Blixer 3 • ®...
Page 9
2) Turn the bowl handle USES & EXAMPLES CLEANING to the right until the bowl locating plates are W A R N I N G The Blixer will enable you to perform all your ® securely positioned in their cutting tasks in minimum time ; we recommend As a precaution, always unplug your appliance sockets.
Page 10
Then wash the blade in the dishwasher. The motor seal can be easily replaced without After washing, always wipe the blade well in order having to remove the motor, so we strongly advise to prevent oxidation. you to ensure that it is in good condition. •...
TECHNICAL • ELECTRICAL DATA W A R N I N G SPECIFICATIONS Blixer 2 single phase machine ® The blades are extremely sharp. Handle with care. • WEIGHT Motor Speed (rpm) Intensity (Amp.) These machines are also equiped with a motor Gross 230 V / 50 Hz 3,000...
Page 17
Head Office, French, Robot Coupe Robot-Coupe Export and Marketing Department: Australia Pty Ltd: U.K. LTD: 48, rue des Vignerons Unit 3/43 Herbert St Fleming Way, Isleworth, 94305 Vincennes Cedex- France Artarmon NSW 2064 Australia Middlesex TW7 6EU Tel.: 01 43 98 88 15 Tel.: (02) 9478 0300...
Need help?
Do you have a question about the Blixer 2 and is the answer not in the manual?
Questions and answers