Troubleshooting - Oregon Scientific ATC9K User Manual

XV) Troubleshooting
There's no display
• Does the rechargeable battery properly installed?
• Does the rechargeable battery need replacing?
After the ATC9K is connected to my PC, it cannot find the new drive
in
the 'My Computer' folder
• Ensure each end of the ATC9K USB cable is properly and firmly connected.
• Ensure your USB port is working properly. Try connecting another USB
device into the port. If the other device does not work, the USB port may
have a malfunction. In this case, contact your system manufacturer or the
manufacturer of your USB card.
I can't capture video footage
• Ensure there is enough space in the microSD card; the display will tell you
how much time left is available for video recording.
• Ensure the microSD card is not locked.
The remaining time is not accurate
• The remaining time is an estimate.
• The remaining time depends not only on the time recorded, but on the color
density of the video footage. Under conditions with high contrast, such as
outdoors, the actual time available will be less than under low-contrast
conditions, such as indoors.
I can't play the video footage on my television
• Ensure each end of the HDMI cable is properly and firmly connected to
ATC9K and to your television.
• Ensure the ATC9K and television are both turned on.
The sound is very low or there is no sound
• Ensure to increase the volume of the speaker in the volume setting.
• The ATC9K is specifically designed for extreme sports and is waterproof,
it is for this reason that we have made the microphone less sensitive.
The LED keeps flashing while the rechargeable battery is charging
• For some special circumstances, the mentioned situation means the
rechargeable battery is fully charged.
- 22 -