Camera Settings - Oregon Scientific ATC9K User Manual

Display the video resolution setting.
Display the photo resolution setting.
Display the EV value.
Display the quality setting of the videos & photos.
Indicate that there is no microSD card inserted. The red line will disappear when a
microSD card is inserted.
Privacy Mode is on. It will disappear when it is disabled in the user settings.
GPS function is on. It will disappear when the camera is not equipped with the
GPS module or it is disabled in the user settings.
GPS function is on but the GPS module is either searching or establishing connections
with satellites. The process will take minutes to complete but the duration depends
on the surroundings of your location as well as weather conditions.
G-Sensor function is on. It will disappear when it is disabled in the user settings.
Night Mode is on. It will disappear when it is disabled in the user settings.
Continuous shots function is on. It will disappear when it is disabled in the user
settings.
Self timer function is on. It will disappear when it is disabled in the user settings.
Display the white balance setting.
Display the battery status.
X) Camera Settings
There are 5 main camera settings which are Video, Photo, G-Sensor, GPS and
General Settings. The GPS setting is activated only when the GPS module (sold
separately) is attached onto the camera.
1. To enter into Settings, press "Menu" button
view mode.
2. You can scroll through these categories by pressing "Left"
and "Right" buttons
3. To enter the category, press "Play/Pause" button
4. To select a setting, press "Play/Pause" button
5. To select options under a setting, press "Left" and "Right"
buttons
6. To confirm an option, press "Play/Pause" button
7. To exit settings, press "Menu" button
- 8 -
.
.
in the live
.
.
.
again.