General Settings - Oregon Scientific ATC9K User Manual

5. White B. (White Balance)
According to different environment, you can select Auto, Daylight, Cloudy,
Fluorescent and Tungsten to adapt a correct color tone of the photo.
6. Contrast
According to your preference, you can adjust contrast level with Standard,
Soft, Hard.
7. Sharpness
According to your preference, you can adjust sharpness with Standard, Soft,
Hard.
8. Effect
You can add effects to the video too. Just select Vivid, Negative, Black and
White, Sepia or Art.
9. Timer
You can set a countdown time before the shutter captures automatically.
10. Cont' Shots (Continuous Shots)
You can set the camera to either take 3 or 5 continuous shouts with this setting.
G-Sensor Settings
1. Operate
You can turn on or off the G-Sensor here. Power consumption can be reduced
by turning off the G-Sensor.
2. Data Display
You can display G-Sensor related data on the videos and photos via HDMI
output by turning on this setting.
GPS Settings
GPS Module is sold separately. Please refer to the corresponding manual for
these settings.

General Settings

1. Laser Pt. (Laser Pointer)
This setting allows you to have either 5 or 10 seconds to adjust the direction of
the camera using the laser pointer before the capturing of videos after you
press the "Movie Shutter" button
2. Volume
You can adjust the sound volume here.
3. Privacy
With Privacy mode on, all LED and Audio indicators will be turned off.
- 10 -
.