Download Print this page

John Lewis Anna swinging crib Instruction Manual page 5

Step 4

Fixing 4

Fixing 1

Fixing 5

Part E

Fixing 4

Part D

Fixing 6

Part A/B

Part B

Fixing 1

Fixing 8

Part A

Fix the assembled crib structure to the crib feet (part A and part B). Note: the crib

structure should be placed so that the swing key plate (at one end) is aligned with the

stop peg (fixing 8) in the crib foot (part A). From the inside of the crib, insert one 70mm

bolt (fixing 1) through the crib end (part D), followed by a wooden spacer (fixing 5), the

crib foot (part A/part B) and a metal sleeve (fixing 6). Secure using a sleeve nut (fixing 4)

as shown. Repeat this process for the other end of the crib. Tighten all fixings fully.

To lock the swinging motion, insert the stop peg (fixing 8) into the key plate (located on

the crib end) and rotate 90° to the left or right. To unlock the swinging motion, rotate

and remove the stop peg (fixing 8) from the key plate. Note: the swinging function

should always be locked when moving the crib and when your baby is asleep or left

unsupervised.