Related Manuals for John Lewis Anna swinging crib
Summary of Contents for John Lewis Anna swinging crib
- Page 1 Anna swinging crib Instruction manual Important - Retain for future reference - please read carefully...
- Page 2 Thank you for purchasing this Anna swinging crib. Please read the instructions and Parts warnings carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact your nearest John Lewis department store.
- Page 3 Parts Crib foot x 1 Crossbeam x 1 Crib end x 2 Stop peg crib foot x 1 Side rail x 2 Base x 1 You will need: 1 x Cross-headed screwdriver 1 x Flat-headed screwdriver 1 x Allen key (supplied) Step 1 Fixing 9 Part A...
- Page 4 Step 2 Part B Part A Fixing 10 Part C Fixing 8 Fixing 2 Fixing 7 Insert one wooden dowel (fixing 10) into the top pre-drilled hole at each end of the crossbeam (part C). Fix the crib feet (part A and part B) to the crossbeam (part C) using one 50mm bolt (fixing 2) and one barrel nut (fixing 7) at each end as shown.
- Page 5 Step 4 Fixing 4 Fixing 1 Fixing 5 Part E Fixing 4 Part D Part D Part D Fixing 6 Part A/B Part B Fixing 1 Fixing 8 Part A Fix the assembled crib structure to the crib feet (part A and part B). Note: the crib structure should be placed so that the swing key plate (at one end) is aligned with the stop peg (fixing 8) in the crib foot (part A).
- Page 6 Be aware of the risks of open fires and other such sources of strong heat, such as electric bar fires, gas fires, etc in the vicinity of the crib. Ensure the crib is positioned away from any cords on blinds or curtains to avoid risk of entanglement. John Lewis Partnership 171 Victoria Street London SW1E 5NN...