Related Manuals for John Lewis Anna cot
Summary of Contents for John Lewis Anna cot
- Page 1 Anna cot Instruction manual IMPORTANT RETAIN FOR FUTURE REFERENCE PLEASE READ CAREFULLY...
- Page 2 Thank you for purchasing this Anna cot. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact your nearest John Lewis department store.
- Page 3 Step 1 Part B Part A Fixing 1 Part A Overhang should be inside cot. Assemble the fixed side (part B) to the cot ends (part A) using four 50 mm bolts (fixing 1). Note the fixed side should be assembled to the cot end legs on the side without dropside grooves and side’s top overhang should be inside cot.
- Page 4 Step 3 Part D Fixing 4 Part A Part A The cot has a choice of three mattress base height positions. Screw four assembly dowels (fixing 4) into lower, middle or upper mattress base position on the inside of the cot ends (part A). Note the dropside is only functional when the mattress base is in its lowest position.
- Page 5 Step 5 For installation of drop side insert the drop side runner into the one cot end groove. Move the second drop side runner into another cot end groove and gently push the drop side upwards. Step 6 Securely tighten all bolts. On the drop side ends there is a pin with a spring. Slide the pin into the cot ends and swing the drop side down so that it is securely in position.
- Page 6 How to lower drop side Lift dropside 2 cm up Carefully push dropside bottom inwards Lower dropside until it locks in lower position How to lift drop side Lift dropside 2 cm up Carefully push dropside bottom inwards Lift dropside until it locks in upper position...
- Page 7 Do not allow your child to jump on the cot. This may result in damage to the furniture and/or injury to your child. Retain this information leaflet for future reference. John Lewis Partnership 171 Victoria Street London SW1E 5NN...
Need help?
Do you have a question about the Anna cot and is the answer not in the manual?
Questions and answers
How to disassemble the John Lewis Anna cot - take it down
The manual does not provide specific instructions for disassembling the John Lewis Anna cot. However, based on the assembly steps, disassembly would involve reversing the assembly process:
1. Remove the drop side by sliding the pins out from the cot ends.
2. Unscrew and remove all bolts securing the drop side, fixed side, mattress base, and cot ends.
3. Carefully separate all parts, including dowels and barrel nuts.
Ensure small parts are kept away from children during disassembly.
This answer is automatically generated
can we buy a crossbeam?