Turning On The Power; Moving The Appliance For Relocation - LG GCFB507PQAM Manual

INSTALLATION
14
Door Alignment for Freezer
and Fridge Door
If the door of the appliance is not level,
adjust the difference in the height of
appliance door.
Open the door and use the spanner
1
to loosen the keeper nut by turning
a
it to the left.
CAUTION
• Do not adjust the height of the
appliance door more than 3 mm.
NOTE
• Leveling the doors may not be possible
when the floor is not leveled, or is of
weak or poor construction.
• The refrigerator is heavy and should
be installed on a rigid and solid
surface.
• Some timber flooring may cause
levelling difficulties if it flexes
excessively.

Turning on the Power

Connecting the Appliance
After installing the appliance, connect
the power plug into the outlet socket. Do
not double up with other appliances on
the same outlet.
NOTE
• After connecting the power supply
cord (or plug) to the outlet, wait 3 or 4
hours before you put food into the
appliance. If you add food before the
appliance has cooled completely, your
food may spoil.
• To turn off the appliance, disconnect
the power plug from the socket outlet.
Moving the Appliance for
Relocation
Preparing for Relocation
1 Remove all food from inside the
appliance.
2 Pull the power plug out, insert and fix
it into the power plug hook at the rear
or on top of the appliance.
3 Tape parts such as shelves and the
door handle to prevent from falling
off while moving the appliance.
4 Move the appliance with more than
two people carefully. When
transporting the appliance over a
long distance, keep the appliance
upright.