Dell Inspiron One 2305 Service Manual page 50

4. Place the memory-module cover on the system-board shield and slide the memory-module cover into place.
5. Tighten the screw that secures the memory-module cover to the system-board shield.
6. Replace the back cover (see
7. Follow the instructions from
CAUTION:
result in damage to the computer.
8. Connect your computer and all attached devices to electrical outlets, and then turn them on.
9. When the message appears stating that memory size has changed, press <F1> to continue.
10. Log on to your computer.
To verify that the memory is installed correctly, click Start
Check the amount of memory (RAM) listed.
Back to Contents Page
Great user manuals database on
Replacing the Back Cover).
step 4 to step 5 in Replacing the Front
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Stand.
® Control Panel® System and Security® System.