Bang & Olufsen Beoplay A9 3rd generation Service Manual page 9

Network Connectivity
BT Connectivity
Audio source
Ethernet
First 5min
idle after 5min
Wi-Fi setup/connecting
Setup (WAC Open) In progress
Reconnect In progress
Wi-Fi Connection status (X>25%)
In general (for 5min)
In general (idle after 5min)
Wi-Fi Connection status (Signal strength: 25
≥ X ≥ 10 %)
In general (for 5min)
In general (idle after 5min)
Wi-Fi Connection status (X<10%)
In general (for 5min)
In general (idle after 5min)
Wi-Fi Not configured or Wi-Fi Error
In general (for 5min)
In general (idle after 5min)
Bluetooth parring
In progress (Only when product turn off
"Always Open")
Successfully
Fail (Apply for Cancel via webpage and
manually trigger timeout)
BLE pairing
In progress (only when Pairing is manually
triggered)
Successfully
Fail (Apply for Cancel via webpage and
manually trigger timeout)
Bluetooth active source
For first 5min
Pause BT source
Change to other source)
Disconnect BT
Idle after 5min
Non-BT active source
Disconnect BT
Switch to BT source
Fault flow chart
Product indicator Network/Bluetooth indicator
No change White (Solid)
No change Transition to dim
No Change Amber (Pulse, repeat)
No Change Amber (Flash, repeat)
No change White (Solid)
No change White (Transition to dim)
No change Amber (Solid)
No change Amber (Transition to dim)
No change Amber (Solid)
No change Amber (Transition to dim)
No change Blue (Solid)
No change Blue (Transition to dim)
Product indicator Network/Bluetooth indicator
No change Blue (Flash, repeat)
No change Blue (Transition, 5sec)
Red (Transition, 5sec)
No Change Blue (Flash, repeat)
No Change Blue (Transition, 5sec)
Not required Red (Transition, 5sec)
Product indicator Network/Bluetooth indicator
No change Blue – on
No change
No Change Change from Blue to Network
No Change Change from Blue to Network
No Change Blue – dim
No Change Blue (Transition, 5sec)
No change No change
No change Change from Network status to
2.3
Blue
status
status
Blue