Base cover assembly
Prerequisite
Before you start, read
Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 27.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
Removal procedure
Installation procedure
32
100w Gen 4/300w Yoga Gen 4/500w Yoga Gen 4 User Guide
and print the following instructions.