Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
Pin and Indicator light Definitions
3.4
No.
Identification name
1
Factory button
2
ANT
RXD
3
Indicator light
TXD
4
Indicator light
PPS
5
Second pulse
indicator
PWR
6
Indicator light
7
DC_IN
8
Power interface
9
RS-485 interface
Copyright ©2012–2022, Chengdu Ebyte Electronic Technology Co., Ltd.
Long press for 5-10s is valid, and the device address and baud rate parameters
are restored to the factory parameters; Factory parameters: the device address
is 1, the serial port parameter is 9600/8/no parity/1
SMA antenna interface, need to use GPS active antenna
Receive indicator, flashes when receiving data from RS485 bus
Transmitting indicator, flashes when transmitting data to RS485 bus
Steady on when the positioning is invalid; flashes once per second after the
positioning is valid
Power indicator, steady on when power on
Power interface, 5~36V DC female socket (inner needle diameter 2.0mm, hole
diameter 6.4mm)
3.81mm phoenix terminal power input positive (top), power input negative
(bottom), 5~36V DC, cannot supply power with socket at the same time
RS485 bus B (top), RS485 bus A (bottom)
Function description
E108-D01 User Manual
8
Advertisement
Table of Contents
