Overview; Introduction; Features; Quick Start - Ebyte Wireless Modem User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.

1. Overview

1.1 Introduction

E108-D01 is a positioning terminal that supports multiple positioning systems (GPS,
BDS, GLONASS, Galileo, etc.), with fast response and accurate positioning.
It outputs positioning information through the Modbus RTU protocol, supporting the
output of RMC-ASCII strings conforming to the NMEA0183 protocol. It aslo supports
separate registers to store (longitude, longitude direction, latitude, latitude direction, etc.),
The baud rate of the serial port can reach up to 115200bps, which can be easily modified
through the Modbus RTU protocol, convenient and fast.

1.2 Features

Support single-system positioning of BDS/GPS/GLONASS/GALILEO/QZSS/SBAS satellite navigation system,

and multi-system joint positioning in any combination;
Multiple serial port baud rates (1200-115200bps) can be configured;

Support standard Modbus RTU protocol to read positioning information;

Multiple output formats for positioning information;

The antenna positioning status is output through registers and indicator lights;

The serial port supports TVS and overcurrent protection;

Industrial grade design, support operating temperature up to -40 ~ 85 ℃;

Support wide voltage input DC 5-36V;

The positioning accuracy can reach 2.5 meters (CEP50);


2. Quick Start

2.1 Preparation

Take obtaining the REC positioning information output by the device as an example:
Hard wares preparation:
A computer;

E108-D1 positioning module;

Active GPS antenna (SMA, inner thread, inner needle);

One USB to RS-485 serial cable;

Copyright ©2012–2022, Chengdu Ebyte Electronic Technology Co., Ltd.
E108-D01 User Manual
3