Cleaning - ProBreeze PB-F08 Instruction Manual

Timer Button
Set a turn-on and turn-off timer between 1 and
24 hours in 1 hour increments.
Setting a turn-on timer:
1. Ensure the appliance is plugged in and the
power socket turned on.
Press the timer button to set the desired time
2.
(between 1 and 24 hours) until turn-on.
3. The timer indicator light will blink for 3
seconds and the hour digits will illuminate to
confirm that a turn-on timer has been set.
4. Select the desired settings prior to turn-on.
5. To cancel the turn-on timer set the time until
turn-on to 0 hours or turn the appliance on
and off.
Setting a turn-off timer:
1. Ensure the appliance is plugged in and the
power socket turned on.
2. Press the power button to turn the appliance
on.
3. Press the timer button to set the desired time
(between 1 and 24 hours) until turn-off.
4. The timer indicator light will blink for 3
seconds and the hour digits will illuminate to
confirm that a turn-off timer has been set.
Select the desired settings prior to turn-off.
5.
6. To cancel the turn-off timer set the time until
turn-off to 0 hours or turn the appliance off
and on.
Fan Speed Control Dial
Increase or decrease the fan speed. 26 fan
speeds available.
Note: Option only available in normal mode.
Up And Down Button
(Remote Control Only)
Increase or decrease the fan speed. 26 fan
speeds available.
Note: Option only available in normal mode.
Mute Button (Remote Control Only)
Mute and un-mute the sound made when
changing settings.
Fan Head Vertical Tilt Adjustment
To alter the angle of the fan head along the
vertical plane gently tilt it up or down to the
desired angle.
Note: The available degrees of vertical tilt
adjustment is 20°.
Height Adjustment
To alter the height of the fan head:
Turn the height adjustment screw counter-
1.
clockwise to loosen.
Adjust the inner pole to the desired height.
2.
Turn the height adjustment screw clockwise
3.
to secure.
Caution: Ensure that the height adjustment
screw is fully secured to prohibit the main fan
body from falling down. Failure to do so could
result in the risk of injury.

CLEANING

WARNING: ALWAYS TURN THE APPLIANCE
OFF, UNPLUG THE POWER CORD FROM
THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT USE ANY ABRASIVE
CLEANERS OR SOLVENTS, AS THIS WILL
DAMAGE THE APPLIANCE.
•
Use a soft, dry cloth to clean away any dust,
or debris from the exterior surface of the
appliance.
•
Do not attempt to clean the appliance in any
other way than that detailed by the
manufacturer.
•
Clean the vents and openings of the
appliance regularly with a vacuum cleaner,
using the brush attachment to avoid any dust
build-up.
English | 11 English | 04