40" Tower Fan Model PB-F04 Thank you for choosing to purchase a product from ProBreeze. Please read the entire manual carefully prior to first use and keep in a safe place for future reference. SAFETY INSTRUCTIONS the air flow of the inlet or exhaust grills whilst in use.
• PLEASE READ AND SAVE THESE To avoid a circuit overload when using IMPORTANT SAFETY INSTRUCTIONS. this appliance, do not operate another WARNING: KEEP BATTERIES OUT OF high-wattage appliance on the same REACH OF CHILDREN. electrical circuit. • Always plug the fan directly into a wall socket.
Page 4
PARTS Side View Main body Rear base Front base Base screw Power cord Control panel Remote control holder Remote Control The remote control will work from 5 metres away from the fan. Oscillation Mode Timer on/off ON/OFF Increase/Decrease Buttons (for wind speed and timer function) 4 | English...
Page 5
Control Panel ON/OFF Fan Speed Oscillation Mode Set Timer Assembly Unscrew the base screw from the fan body (attached to the base of the fan). Connect the rear base to the front base, slotting the two together. Twist the locks to ensure the two are firmly connected (fig.
set. In each setting, the fan speed will OPERATING INSTRUCTIONS change every 6 seconds in the following patterns: Note: the buttons on the control panel mirror the buttons on the remote control. • SPEED 1: LOW > MID > LOW > MID •...
liquids to run into the interior of the Contact your local council or government for appliance, as this could create a fire and/or information regarding the collection schemes electrical hazard. in your area. CAUTION: Do not use any abrasive cleaners or solvents, as this will damage the appliance.
Need help?
Do you have a question about the PB-F04 and is the answer not in the manual?
Questions and answers