ProBreeze PB-F-22 Manual

TO INSTALL THE HEPA FILTERS
― ―
1. Remove the air inlet grille.
2. Remove the pre-filter by pressing either side of the filter and
gently pulling it outwards.
3. Remove the HEPA filter from the protective film.
4. Install the HEPA filter ensuring the "FRONT" tabs are facing
outwards.
5. Reinstall the pre-filter over the HEPA filter.
BLADELESS TOWER FAN
MODEL PB-F-22
6. Reinstall the air inlet grille.
CLEANING AND STORAGE
― ―
WARNING: ALWAYS TURN THE APPLIANCE
OFF AND UNPLUG THE POWER CORD
FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER
OR OTHER LIQUIDS TO RUN INTO THE
INTERIOR OF THE APPLIANCE, AS
THIS COULD CREATE A FIRE AND/OR
ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE
CLEANERS OR SOLVENTS, AS THIS CAN
DAMAGE THE APPLIANCE.
• Do not attempt to clean the appliance
in any other way than that detailed by
the manufacturer.
• Clean the exterior surface of the
appliance by wiping it with a soft, damp
cloth. Dry the appliance with a soft,
clean cloth.
• Clean the vents and openings of the
appliance regularly with a vacuum
cleaner, using the brush attachment to
avoid any dust build-up.
• To extend the lifespan of the filter,
a vacuum cleaner, using the brush
attachment can be used to remove
dust from the surface of the filter.
Storage:
• Store the appliance in a safe, clean, and
dry place, away from direct sunlight and
out of reach of children when not in use.
• To store your product, we recommend
using the original or a similar-sized box.