Connecting and Disassembling Method of Quick Locked Design
Installation
1. Align the connector on the
upper speaker with the connector
on the bottom speaker.
Disassembly
1. Pull the lock down, and move it
to the right.
OPERATION AND CONNECTIONS
KOS Satelite Set
KOS Pole
Adaptor
Adaptor is secured
with the lockpin.
Pole
2. Put the connector of the upper
speaker into the lower connector
and move it to the left.
2. Move up to remove the
speaker.
12
Angel Adjustment
The angle of the satellite speaker can be adjusted in 0° 2.5° 5° 7.5° 10°
4
3
2
1
DSP SETUP
Combination Mode 1
One KOS Sub is connected to a set of
KOS Satelite Set through a pole, and the DSP
is set at the 1 position. Use on the floor,
suitable for small performances.
3. The lock is automatically locked
to complete the installation.
Flip the plate up
Adjust the angle to select the
corresponding hole and secured
with the lockpin.