COMBINATION MODE Combination mode 1 Recommendation list DILOS ×4 0.6M signal cable X 3 2M signal cable X 1 0.6M power cord X 3 2M power cord X 3 DILOS SUB ×1...
Page 10
COMBINATION MODE Combination mode 2 Recommendations list 0.6M signal cable X 3 2M signal cable X 1 DILOS ×4 FlybarX1 0.6M power cord X 3 2M power cord X 1 DILOS SUB ×1...
Page 11
COMBINATION MODE Combination mode 3 Recommendations list DILOS ×6 0.6M signal cable X 5 2M signal cable X 2 Flybar X 1 0.6M power cord X 5 2M power cord X 2 DILOS SUB ×3...
Page 12
COMBINATION MODE combination mode 4 Recommendations list DILOS ×8 0.6M signal cable X 7 2M signal cable X 3 Flybar X 1 0.6M power cord X 7 2M power cord X 3 DILOS SUB ×4...
Page 13
OPERATION MODE AND CONNECTION Multi-angle between every two loudspeaker boxes connection...
Page 14
EQ, noise gate, compression, polarity, delay, etc. The maximum loudspeaker boxes can reach to 32pcs which can be controlled simultaneously. computer DILOS control signal adaptor network cable DILOS Signal input DILOS DILOS SUB signal out DILOS DILOS DILOS DILOS SUB DILOS DILOS network cable POWER IN...
Page 16
DILOS/DILOS SUB CONTROLS AND DUNCTIONS PANEL FUNCTIONS INSTRUCTIONS Link to power in of the next loudspeaker box, the It can be connected to LINE signal source (such as voltage is same between power out and power in. Insert the power cord, rotate right to ON turn the power on, reverse to OFF turn the power off.
Page 17
TECHNICAL SPECIFICIATION DILOS DILOS SUB 60~20kHz 35~120Hz 300Hz 2000Hz 130dB 134dB 1400W 1000W 1*XLR 1*XLR 1*RS485 1*RS485 1* XLR 1* XLR 1*RS485 1*RS485 POWERCON IN POWERCON IN POWERCON OUT POWERCON OUT 220-240 VAC 50/60Hz 220-240 VAC 50/60Hz T4AL/250V T6.3AL/250V DSP digital limiting DSP digital limiting woofer:1*8"...
SUPPORT AND TROUBLE SHOOTING TROUBLE SHOOTING Please check whether the power cord is tightly plugged and turn right to the ON position. Please check whether all cables are right connected and the connection is firm. No sound from Please check whether the settings of DSP and LEVEL are in the normal working position. the loudspeaker Make sure the sound source device is working normally and can play the required signal.