Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell G16 7630 Owner's Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the rear cover.
5. Remove the touchpad.
6. Remove the keyboard-controller board
7. Remove the display assembly.
8. Remove the solid-state
9. Remove the wireless card.
10. Remove the memory modules.
11. Remove the speakers.
12. Remove the power adapter
13. Remove the system board.
NOTE: The system board can be removed as an assembly with the fan and heat-sink assembly, ethernet and audio
board, and USB board attached.
14. Remove the ethernet and audio
15. Remove the USB board.
16. Remove the fan and heat-sink
17. Remove the power button.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
78 Removing and installing Field Replaceable Units (FRUs)
Before working inside your
drive.
port.
board.
assembly.
computer.