Installing The Power-Adapter Port - Dell G16 7630 Owner's Manual

Steps
1. Remove the two screws (M2x5) on the power-adapter port-bracket that secures the power-adapter port to the palm-rest
and keyboard assembly.
2. Lift the power-adapter port-bracket off the power-adapter port.
3. Disconnect the power-adapter port-cable from the system board.
4. Peel the power-adapter port cable off the system board.
5. Lift the power-adapter port and its cable off the palm-rest and keyboard assembly.

Installing the power-adapter port

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation
procedure.
62 Removing and installing Field Replaceable Units (FRUs)