Table of Contents About This Manual 1. Safety Precautions ..........1 1.1 Warning Stickers 1.2 Placing Site 1.3 Safety Precautions 1.4 Precaution during Play 1.5 Transporting and Moving 1.6 Installing and Placing 1.7 Caution & Warning Stickers 2. Product Description ..........2.1 Product Specification 2.2 Overview 2.3 Parts Name...
Page 4
4.5.2 Month Report 4.5.3 Total Report 4.5.4 Reset Report 4.5.5 Reset List Rank 5. Maintenance and Service ......... 5.1 Maintenance and service 5.2 Part Replacement 5.2.1 Maintenance and replacement of coin slot 5.2.2 Maintenance of host 5.2.3 Maintenance and replacement of power box 5.2.4 Replace speaker and blower at right of console(same for the left side) 5.2.5 Replacement of LCD 5.2.6 Replace speaker below LCD...
Page 5
6.4 Assembly of light box(JPL-0200000) 6.4.1 Assembly of front light box at top(JPL-0201000) 6.4.2 Assembly of right small light box at top(JPL-0202000) 6.4.3 Assembly of left small light box at top(JPL-0203000) 6.4.4 Assembly of small light box at top(JPL-0204000) 6.4.5 Assembly of billboard(JPL-0205000) 6.5 Assembly of vibration seat(JPL-0300000) 6.5.1 Assembly of vibration base(JPL-0301000) 6.5.2 Assembly of air bag(JPL-0302000)
1. Safety Precautions 1.1 Warning Stickers In order to avoid injury to related people and damage to property, please observe the followings: PLEASE READ FIRST The following marks can be used to indicate the magnitudes of risk and damage caused by ignorance or improper operation: Warning means “may result in serious injury or death”...
2. Product Description 2.1 Product Specification Location Indoor Only Dimension 1505(W)×2370(D)×2590(H) AC220V 50HZ /60HZ Rated Voltage、 Frequency AC110V 50HZ /60HZ Power Consumption 1850 W Weight 475 kg 5~40 。 C Temperature Range * 110V voltage can be set through the transformer and fuse. Please contact the distributor for details. NOTE:The contents herein described are subject to change without notice.
2.3 Parts Name Decoration sheet Billboard at two sides Decoration at two sides of light box Small light box at top Emergency-stop button 55-inches LCD Start button Decoration at two sides of LCD Paddle assembly Air outlet View button Speaker Pedal Seat Vibration rack...
2.5 Packing List Please check the following items after purchasing our product. If any part missing or damaged, please contact our sales person! Description Specification Quantity Remarks Lexus key cross recessed fillister head M4*12(Chrome) three-combination screw M4*12(Chrome) Hex Socket Cap Screws 8*20*16*1.5(black) Hexagon triple combination 6*16*12*1.2(black)
2.6 Install Direction Step 1 Assembly of Billboard 1、Use four M4*12 cross round head three-combination screws to fix billboard assembly; 2、Use four M4*12 large flat head socket hexagon screws to fix decoration at left and right of billboard. Left and Right of billboard Billboard...
Page 19
Step 2 Assembly of light box at top 1、Remove 10 M4*12 cross round head three-combination screws, and remove assembly 1. 2、Lift the top light box, align it with fastener position, and insert it into from front to rear. 3、Use 6 M6*16 hex screws to fix top light box assembly. 4、Connect the wires, and install assembly 1.
Page 20
Step 3 Connection of seat 1、Align the seat assembly with display assembly, and connect the wires; 2、Use 6 M8*20 hex screws to connect seat assembly. Special attention:When special case occurs in shipment, please check “Installation guide” in attachment box of shipment, and make assembly according to installation guide; special supplement will not be made in this instruction.
2.7 Warranty Scope Inquiry regarding product can be assisted for free. The warranty scope for consumables and durables may differ from product to product. Please contact our after-sales service center for detailed information. The right of final interpretation is reserved. Exclusive Damage caused by force majeure such as god will.
3.2 Game introduction "Crazy Rafting" is an arcade experience game with canoe as the carrier and adventure travel in the prehistoric explosion of life as theme; where players will play roles of one/two canoes rowers, manipulate long paddles of canoe, visit the scenarios full of different features, interact with the prehistoric creatures, experience the exciting adventure, arrive at the destination before the end of the countdown, and escape from the prehistoric world.
4.1 Background operation 1.First of all, confirm that the machine is started and in " Game standby screen " or " Loop video demo screen", i.e., no coin inserted and no player in playing. 2.Open the coin slot of machine, operate the keyboard in the background, press the [TEST] button to enter the main menu of [Options], and you will see the following contents: 3.Select items via using [UP] and [DOWN] on the background keyboard, and the selected items will be highlighted.
4.2 Sensor Setting In the "Sensor Setting" menu, as shown in the figure below: Select the hardware sensor to be tested, then perform operations according to the corresponding hardware keys, and view the connection state and operation state. 4.3 HardWare Test The functions of this submenu items are described as follows:...
4.3.1 Motion Test 1.Select the "Motion Test" submenu, and the following screen will be displayed. 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted. 3.After selecting the dynamic air bag to be tested, press the [TEST] button to switch to dynamic state, which is divided into deflating and inflating.
4.3.2 Lighting Test 1.Select the "Light Test" submenu, and the following screen will be displayed. 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted. 3.After selecting the light to be tested at current stage, press the [TEST] button to switch to the light state.
4.3.3 Speaker Test 1.Select the "Speaker Test" submenu, and the following screen will be displayed. 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted. 3.After selecting the speaker to be tested, press the [TEST] button to switch to the speaker state.
4.3.4 Fan Test 1.Select the "Fan Test" submenu, and the following screen will be displayed. 2.Press the [TEST] button on the item you want to select to enter the operation, or enter the submenu item. 3.After selecting the fan to be tested, press [TEST] to switch to the fan state. The fan states can be Off, 25, 50, 75, or 100.
4.4 Game setting 1.[Options] menu: select [Game setting] via using [UP] and [DOWN] on the background keyboard, and press the [TEST] button to enter the submenu screen of [Game setting]. 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted.
4.4.2 Coin Setting 1.In the "Game Setting" menu, select "Coin settings" via using the "UP" and "DOWN" keys on the background keyboard, and press the "TEST" button to enter the submenu item screen of "Coin settings". 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted.
4.4.5 Language Setting 1.In the "Game Settings" menu, select "Language Setting" via using the "UP" and "DOWN" buttons on background keyboard, and press the "TEST" button to enter the submenu item screen of "Language settings". 2.Select items via using [UP] and [DOWN] on the keyboard, and the selected items will be highlighted.
4.5.2 Month Report 1.Select the "Month Report" submenu, and the following screen will be displayed. 2.Use the [Up] and [Down] on the background keyboard to scroll data up/down. 3.Items contained in the monthly report are described below: a.Year/Month: indicates the month of data in the row; b.CoinNumber: indicates the total number of coins related signals received by this machine in this month c.PlayCount: indicates the number of new games played by player(s) on this...
4.5.4 Reset Report 1.Select the submenu [Reset Report], and the following screen will be displayed. 2.Press the [TEST] button again according to the prompt, and the selected item [Reset Report] will confirm to clear the daily report, monthly report and total table to the following state at the same time.
5. Maintenance and Service 5.1 Maintenance and service Even though the machine works normally for a long time, the fault will occur. Therefore, please perform routine check and maintenance concerning the following to ensure a long-term use. External Inspection Stick “Warning” stickers correctly, keep it legible. Firmly tighten the bolt for each adjuster.
5.2 Part Replacement 5.2.1 Maintenance and replacement of coin slot 1.Open the coin door with the key; 2.Remove the screws for fixing the coin slot, remove and replace the coin slot (pay attention to the connection of the wires); 3.Install back in reverse order. coin 5.2.2 Maintenance of host 1、Remove screws of upper rear door, and remove the upper rear door;...
5.2.3 Maintenance and replacement of power box 1、Remove screws of upper rear door, and remove the upper rear door; 2、Remove the screws for fixing power box assembly, remove the connecting wires, and remove the power box assembly. 3、After replacement, assemble in reverse order. POWER BOX REAR DOOR 5.2.4...
5.2.5 Replacement of LCD 1、Remove the screws for fixing LCD front frame, and remove the LCD front frame; 2、Remove screws of upper rear door, and remove the upper rear door; 3、Remove the screw fixing the LCD assembly, remove the connecting wires, and remove the LCD assembly;...
5.2.7 Replace left light below LCD (same for the right) 1、Remove the fixing screws for left light assembly below LCD, and remove the light assembly; 2、Replace the LED light strip; 3、After replacement, assemble in reverse order. left light assembly below LCD LED light strip 5.2.8 Replace solenoid valve 1、Remove the screws for front pedal of seat, and remove the front pedal;...
5.2.9 Replace light strip in the middle of seat 1、Remove the acrylic screws in the middle of seat, and remove the acrylic; 2、Replace the light strip, and connect the wires; 3、After replacement, assemble in reverse order. acrylic in the middle of seat light in the middle of seat 5.2.10...
5.2.11 Replace light strips at two sides of vibrating base 1、Remove the fixing screws, and remove acrylic cover plate; 2、Take out the light strip assembly; 3、After removing the wires, replace the light strip; 4、After the replacement, connect the wires, and install it in reverse order. he light strip assembly acrylic cover plate 5.2.12 Replace light strip in front of light box...
5.2.13 Replace light strip of top front light box 1、Remove the fixing screws, and remove the acrylic of top front light box; 2、Remove the screws, remove the pressing pieces, and replace the light strip; 3、After replacement, connect the wires, and install it in reverse order. the acrylic of top front light box...
6. Assembly 6.1 Assembly tree diagram Body frame Assembly of display Assembly of front speaker Assembly of light box at left of screen Assembly of air compressor Assembly of exhaust valve Assembly of air valve Assembly of fan Assembly of power box Assembly of body Assembly of main machine Assembly of light at bottom left of screen...
6.3.1 Body frame(JPL-0101000) cross the big flat head screw M4*8(chrome) hex head cap screw M4(Colour) cross recessed cheese head M4*50(chrome) screws hexagon nut M16(Colour) cross recessed fillister head M6*25(chrome) three-combination screw cross recessed fillister head M6*16(chrome) three-combination screw fan cover 120*120 1.4.FS300020 fan with bearing...
6.3.4 Assembly of light box at left of screen(JPL-0104000) cross recessed countersunk M4*12(chrome) head screws hex head cap screw M4(Colour) white impact-resistant JPL-0104C01 Two-sided plastic 1.8.WX02A00010 acrylic DC12V RGB60 5050 strip light 1.4.ZM9E0092 lampL=1650mm Light boxes on both sides of JPL-0104A01 1.1.WX02A00160 the screen...
6.3.5 Assembly of air compressor(JPL-0105000) Self-Locking Nuts M6(Galvanization) plain washers Φ6*Φ20*2.0(chrome) cross recessed fillister head M6*25(chrome) three-combination screw cross recessed fillister head M6*16(chrome) three-combination screw hex head cap screw M4(Colour) cross recessed fillister head M6*12(chrome) three-combination screw hex head cap screw M5(Colour)...
6.3.8 Assembly of fan(JPL-0108000) cross recessed fillister head M3*12(chrome) three-combination screw fan cover 120*120 1.4.FS300020 vbp-01-14-01 fan bracket SECC-1.0T 1.1.IG13A00280 fan with bearing 120*120/AC110V 1.4.FS200042 Draw No. Name Material/Spec. Qty. Product Code...
6.3.9 Assembly of power box(JPL-0109000) cross recessed fillister head M4*8(chrome) three-combination screw power supply LRS-200-12 1.4.DY170100 JPL-0109A01 power supply fixed plate SECC-1.2T 1.1.WX02A00200 Draw No. Name Material/Spec. Qty. Product Code...
6.3.10 Assembly of main machine(JPL-0110000) cross recessed fillister head M6*12(chrome) three-combination screw cross recessed fillister head M5*16(chrome) three-combination screw cross recessed fillister head M4*8(chrome) three-combination screw IPC-WL002-3470 1.4.ZJ010034 lanhe shaped foot shock 1.8.AA000250 JPL-0110A01 main pc set fixed iron SECC-1.5T 1.1.WX02A00210 main pc set mounted wooden JPL-0110B01...
6.3.11 Assembly of light at bottom left of screen(JPL-0111000) DC12V White60 5050 strip light 1.4.ZM9E0605 lampL=550mm JPL-0111A01 Acrylic iron on both sides SPCC-1.2T 1.1.WX02A00220 Draw No. Name Material/Spec. Qty. Product Code...
6.3.13 Assembly of filter(JPL-0113000) hex head cap screw M4(Colour) cross the big flat head screw M3*8(chrome) fuse tube F6A/5*20 250V 1.4.BX106020 filter YB11A2-15A-Q 1.4.LB100080 filter with switch YB11C1-10A-Q 1.4.LB100090 JPL-0113A01 power supply SPCC-1.2T 1.1.WX02A00260 Draw No. Name Material/Spec. Qty. Product Code...
6.3.14 Assembly of front speaker board(JPL-0114000) hex head cap screw M4(Colour) JPL-0114A02 Front horn plate 2 screen-0.8T 1.1.WX02A00280 JPL-0114A01 Front horn plate 1 SPCC-1.2T 1.1.WX02A00270 Draw No. Name Material/Spec. Qty. Product Code...
6.3.16 Assembly of light at right of screen(JPL-0116000) hex head cap screw M4(Colour) cross recessed countersunk M4*12(chrome) head screws white impact-resistant JPL-0104C01 Two-sided plastic 1.8.WX02A00010 acrylic DC12V RGB60 5050 strip light 1.4.ZM9E0092 lampL=1650mm Light boxes on both sides of JPL-0104A01 1.1.WX02A00160 the screen Draw No.
6.3.17 Assembly of light at bottom right of screen(JPL-0117000) DC12V White60 5050 strip light 1.4.ZM9E0605 lampL=550mm JPL-0111A01 Acrylic iron on both sides SPCC-1.2T 1.1.WX02A00220 Draw No. Name Material/Spec. Qty. Product Code...
6.4.1 Assembly of front light box at top(JPL-0201000) hex head cap screw M4(Colour) hex socket cap screws M4*25(chrome) cross the big flat head screw M4*20(chrome) hex head cap screw M3(Colour) cross recessed fillister head M6*16(chrome) three-combination screw JPL-P0005 Theme light box PMMA-3.0T 1.7.WX02A00080 JPL-0201D01...
6.4.2 Assembly of right small light box at top(JPL-0202000) cross recessed countersunk M4*12(chrome) head screws hex head cap screw M4(Colour) white impact-resistant JPL-0202C01 Top right end cap 1.8.WX02A00020 acrylic DC12V RGB60 5050 strip light 1.4.ZM9E0506 lampL=550mm JPL-0202A01 Top right light box base 1.1.WX02A00370 Draw No.
6.4.3 Assembly of left small light box at top(JPL-0203000) cross recessed countersunk M4*12(chrome) head screws hex head cap screw M4(Colour) white impact-resistant JPL-0203C01 Top left end cap 1.8.WX02A00030 acrylic DC12V RGB60 5050 strip light 1.4.ZM9E0506 lampL=550mm JPL-0203A01 Top left light box base 1.1.WX02A00380 Draw No.
6.4.4 Assembly of small light box at top(JPL-0204000) hex head cap screw M3(Colour) model name box led lights ME-0508D03 PVC-1.0T 1.7.IG22B00510 with tablet DC12V White60 5050 strip light 1.4.ZM9E0515 lampL=350mm DC12V White60 5050 strip light 1.4.ZM9E0075 lampL=1100mm JPL-0204A01 Top small light box 1.1.WX02A00390 Draw No.
6.4.5 Assembly of billboard(JPL-0205000) hex head cap screw M4(Colour) hex socket cap screws M4*12(chrome) plain washers Φ4*Φ16*1.0(chrome) Elephant decoration on the JPL-P0008 PVC-0.5T 1.7.WX02A00110 right JPL-P0007 Left dinosaur ornament PVC-0.5T 1.7.WX02A00100 JPL-0205A01 Kanban fixed iron SPCC-1.5T 1.1.WX02A00400 Theme background JPL-P0006 Andy board-5.0T 1.7.WX02A00090 decoration...
6.5 Assembly of vibration seat(JPL-0300000) cross recessed fillister head M4*12(chrome) three-combination screw Hexagon triple combination 8*20*16*1.5(Black) JPL-0304000 Assembly of solenoid valve JPL-0303000 Assembly of damper rubber JPL-0302000 Assembly of air bag JPL-0301000 Assembly of vibration base Draw No. Name Material/Spec. Qty.
6.5.1 Assembly of vibration base(JPL-0301000) hex head cap screw M4(Colour) hexagon nut M16(Colour) cross recessed fillister head M6*25(chrome) three-combination screw anchor bolt (rubber buttom) M16*100(Colour) 1.6.LSV99014 2.5 inch low center of casters 1.4.JL302520 gravity type JPL-0301A01 Vibration base 1.1.WX02A00410 Draw No. Name Material/Spec.
6.5.2 Assembly of air bag(JPL-0302000) Hexagon triple combination 8*16*16*1.5(Black) l type screw thread APL10-02 1.4.JG072110 connector air bag 1B5002 1.4.QL000020 JPL-0302A01 air bag fixed iron SPCC-3.0T 1.1.WX02A00420 Draw No. Name Material/Spec. Qty. Product Code...
6.6 Assembly of upper vibration seat(JPL-0400000) hex head cap screw M4(Colour) hex socket cap screws M4*12(chrome) Shake the top seat on both JPL-P0009 PMMA-3.0T 1.7.WX02A00120 sides of the acrylic Assembly of LED at side of JPL-0401000 vibration seat JPL-0400A01 Vibration upper seat 1.1.WX02A00450 Draw No.
6.6.1 Assembly of LED at side of vibration seat(JPL-0401000) DC12V RGB60 5050 strip light 1.4.ZM9E0807 lampL=450mm Led fixing iron on both sides JPL-0401A01 SPCC-1.0T 1.1.WX02A00460 of vibration frame Draw No. Name Material/Spec. Qty. Product Code...
6.7 Assembly of seat(JPL-0500000) cross the big flat head screw M5*20(chrome) plain washers Φ6*Φ20*2.0(chrome) spring washer M8(Black) external hex socket screw M8*50(Black) cross recessed fillister head M3*8(chrome) three-combination screw plain washers 8* 22*2.0(Black) hex head cap screw M4(Colour) Hexagon triple combination 8*30*16*1.5(Black) hex head cap screw M6(Colour)...
6.7.1 Assembly of seat plastic(JPL-0501000) cross the big flat head self- M3*12(chrome) drilling screw cross recessed countersunk M4*12(Black) head screws Self-Locking Nuts M5(Galvanization) JPL-0501D01 Acrylic in the middle of seat white PMMA-2.0T 1.7.WX02A00030 DC12V RGB60 5050 strip light 1.4.ZM9E0509 lampL=2050mm JPL-0501A04 Cable fixing iron 4 Q235...
6.7.2 Assembly of watermark light(JPL-0502000) Water pattern lamp Colorful water pattern lamp 1.4.ZM906020 JPL-0502A01 Water pattern lamp fixing iron SPCC-1.2T 1.1.WX02A00570 Draw No. Name Material/Spec. Qty. Product Code...
6.7.3 Assembly of socket(JPL-0503000) Clamp type three- power outlet hole15A/AC125V(American 1.5.XC203020 Standard) JPL-0503A01 socket fixed iron SECC-1.2T 1.1.WX02A00580 Draw No. Name Material/Spec. Qty. Product Code...
6.7.4 Assembly of safety belt socket(JPL-0504000) Hexagon triple combination 8*20*16*1.5(Black) seat belt 1.4.AQ000060 JPL-0504A01 Safety belt fixing iron 1 SPCC-3.0T 1.1.WX02A00590 Draw No. Name Material/Spec. Qty. Product Code...
Page 85
hex socket cap screws M5*12(chrome) hex socket cap screws M4*12(chrome) cross the big flat head screw M5*12(Black) cross the big flat head screw M4*8(Black) hex head cap screw M4(Colour) Hexagon triple combination 6*16*12*1.2(Black) JPL-0600A07 Propeller shaft sleeve Q235 1.1.WX02A00660 JPL-0600C02 Plastic parts for ship oars Red PE-3.0T 1.8.WX02A00060...
6.8.3 Assembly of coin door frame(JPL-0603000) electronic coin TW-800 1.4.TB100050 TYM-0000000A single coin door frame 2.1.AA030012 Draw No. Name Material/Spec. Qty. Product Code...
6.8.4 Assembly of plastic in front of console(JPL-0604000) hex socket cap screws M4*12(chrome) 12V white (T103W-12V- led lamp for button 1.4.AJA01040 SMD) micro switch D3V-01-1C3 1.4.SW103011 Round illuminated button 60 white BLC-TN-BK-C- 1.4.AJ106031# (with lamp holder) Round illuminated button 44 white BLC-TN-BK-B- 1.4.AJ104011# (with lamp holder) JPL-0604A01...
6.8.5 Assembly of speaker box at left of console(JPL-0605000) cross the big flat head screw M4*8(Black) hex head cap screw M4(Colour) cross the big flat head screw M4*40(chrome) JPL-0605A03 Console horn box cover SPCC-1.2T 1.1.WX02A00850 blower KD1297PNB1 1.4.FS1A0030 JPL-0605A02 Left blower fixed iron SPCC-1.2T 1.1.WX02A00840 4 4Ω/20W(JK-SPK-...
6.8.6 Assembly of speaker box at right of console(JPL-0606000) cross the big flat head screw M4*8(Black) cross the big flat head screw M4*40(chrome) hex head cap screw M4(Colour) JPL-0605A03 Console horn box cover SPCC-1.2T 1.1.WX02A00850 blower KD1297PNB1 1.4.FS1A0030 JPL-0606A02 Right blower fixed iron SPCC-1.2T 1.1.WX02A00870 4 4Ω/20W(JK-SPK-...
Need help?
Do you have a question about the Crazy Rafting and is the answer not in the manual?
Questions and answers