MaxLite ML4LE109S BK2 Series Operating Instructions

Operating Instructions
MaxLite LED Outdoor Fixture
®
General Safety Information
• To reduce the risk of death, personal injury or property
damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards read all warnings
and instructions included with and on the fixture box
and all fixture labels.
• Before installing, servicing, or performing routine
maintenance upon this equipment, follow these general
precautions.
• Commercial installation, service and maintenance of
luminaires should be performed by a qualified licensed
electrician.
• For Residential installation: If you are unsure about the
installation or maintenance of the luminaires, consult a
qualified licensed electrician and check your local
electrical code.
• DO NOT INSTALL DAMAGED PRODUCT!
• This fixture is intended to be connected to a properly
installed and grounded UL listed junction box.
WARNING:
RISK OF ELECTRICALSHOCK
• Turn off the power when you perform any
maintenance.
• Verify that supply voltage is correct by
comparing it with the luminaire label
information.
• Make all electrical and grounded
connections in accordance with the
National Electrical Code and any
applicable local code requirements.
• All wiring connections should be capped
with UL approved wire connectors.
CAUTION:
RISK OF INJURY
• Wear gloves and safety glasses at all times
when removing luminaire from carton,
installing, servicing or performing
maintenance.
• Avoid direct eye exposure to the light
source while it is on.
• Account for small parts and destroy
packing material, as these may be
hazardous to children.
Model Numbers:
ML4LE109SXXBK2
ML4LE109SXXWH2
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: info@maxlite.com
Outdoor Fixture
Page: 1
REV: 8/24/18