UBCO 2X2 ADVENTURE Quick Start Manual page 2

KIA ORA
HELLO.
V3.3
GET READY
A Keep the bike standing in the base to help align the handlebars. Remove the
protective packaging from the bike.
A Find the Field Kit under your seat and set out the tools you'll need.
A Note: Remember to remove the guidance stickers after each step is completed.
1. Align the handlebars
A Loosen the side bolts on the stem A Once the handlebars are
with a 5mm Allen key. Straighten straight, re-tighten the stem bolts,
the handlebars in line with the front alternating as you go to prevent
wheel and so the orange dots align. damage to the clamp. Align the
marking on the bolt head to
achieve the correct tightness.
Torque to 15Nm, if available.
2. Fit the rear indicators (turn signals)
A Unpack the rear indicator lights.
A Install indicators to their respective
side on the rear light bracket. Check
the orientation – the indicator with
a long cable is fitted to left side, the
short cable goes to right side.
A Insert the thread through the mount,
ensuring the nut and two washers
are on the inside. Lights should face
straight back. Use a 17mm spanner to
tighten the fastening nuts.
If your 2X2 has arrived in the box,
here's how to set up your new ride.
Lift up the seat to find a Field Kit with all the tools
you need for assembly and some basic maintenance.
Scissors or a knife will also be handy and a torque
wrench, if you have one.
3. Fit the mirrors
A Remove the mirrors from their box.
A Screw the base of the mirror arm
clockwise into the handlebar mount
approximately 10mm and into the correct
position, but do not tighten.
A Using a 14mm spanner, tighten the
locking nut to secure the mirror arm.
A Slide down the rubber booty.
A Repeat for the other mirror.
A Adjust the mirror angle from a sitting
position to provide maximum visibility.
4a. Install the power supply
A IMPORTANT: inspect the power supply; contact UBCO if there is any damage from transit.
A If the power supply is not already in place, remove the battery strap from the frame and set
aside. With the power socket on the right-hand side of the bike, carefully lower the power
supply into place with both hands.
A Plug the bike's power plug into the power socket. Use the securing key to lock the power
supply in place.
A Secure the battery strap as shown (4b).
Power Supply
Power
Socket
Lock
Power Plug
Scan this QR code to watch
our bike assembly video.
If you don't feel confident
putting your bike together,
contact us for help.
4b. Secure the battery strap
A Velcro side down, tuck the end of the battery strap under the left hand bar,
central to the power supply.
A Carry the strap over the power supply and tuck it under the right hand bar. Feed
the strap back through the clip and centre the clip.
A Tighten the strap and secure it closed.
1
Left
3
bar
Power Supply
READY TO RIDE
STEP 1: STEP 3:
Download the UBCO App Check power supply charge
You can download the UBCO View the charge level on the LCD
App to view speed and battery display or on the
charge, control the settings Live Dash screens of the app.
of your 2X2, and get critical
Your power supply will arrive with
updates delivered wirelessly. partial charge, enough to ride for a
Simply search for UBCO in few minutes. Be sure to fully charge up
your phone's app store and
before you plan a longer ride.
download it for free. Make sure
STEP 4:
Bluetooth is activated on your
mobile phone when connecting
Before you ride
the app to your 2X2.
Ensure you've read the user manual
and are familiar with how to use the
STEP 2:
bike and proper safety precautions.
Turn on the 2X2
Always wear a helmet. Once you're
Grab your keys and ready to ride, twist the throttle and GO!!!
Securing key
power the bike by
pressing the button on
Find UBCO online:
the key fob 1.5 seconds
Key fob
ubcobikes.com
until you hear a beep.
You can now open the
fb.com/ubcobikes
app and connect to
instagram.com/ubcobikes
your bike.
youtube.com/ubcobikes
See the complete
Join the UBCO Owners group for tips
riding instructions in
the User Manual on and tricks from our community.
page 16. facebook.com/groups/ubcoowners
4
Right
bar
2
Home and