Table of Contents
Advertisement
Upgrading the System Memory
Many applications will generally run faster when the computer's
dynamic memory capacity is increased. The computer provides two
DDR memory sockets, located underneath the System Device Cover.
You can increase the amount of memory by replacing the existing one
with a dual inline memory module (commonly known as SO-DIMM) of
a higher capacity. The SO-DIMM can be 128MB, 256MB, or 512MB in
capacity. The SO-DIMM is of type DDR SDRAM, has 200 pins and
runs on 2.5V. The SO-DIMM should be PC2700 compliant.
Warning:
Memory upgrade is a delicate process. Please observe the following
instructions carefully or have a qualified technician install it for you. Damages due to
mishandling of this procedure are NOT covered by the manufacture's warranty.
Warning:
Changing memory while your computer is in suspend or power-saving
mode may cause permanent damage to the hardware. Make sure you turn off the
power and unplug the AC cord before proceeding with a memory upgrade.
Warning:
You should only use the DIMM module that is approved by the reseller or
the manufacturer; otherwise the system may become unstable.
4-6
■ chapter 4 upgrading your computer
Advertisement
Table of Contents
