1. Manuals
  2. Brands
  3. Optima Manuals
  4. Laptop
  5. Centoris V480
  6. User manual

Optima Centoris V480 User Manual

Optima centoris v480: user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Centoris V480 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Optima Centoris V480

Summary of Contents for Optima Centoris V480

  • Page 3 Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

  • Page 4: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 6: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer Do not place it on an unstable Do not place anything heavy...
  • Page 7 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 8: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer. • Your AC/DC adapter may be designed for international travel but it still requires a steady, Power Safety uninterrupted power supply. If you are unsure of your local power specifications, consult Warning your service representative or local power company.

  • Page 9: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not remove any batteries from the computer while it is powered on. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 10: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 11: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 12 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
  • Page 13 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 14: Lcd Screen Care

    Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. •...

  • Page 15: Table Of Contents

    Preface Contents Notice .................I System Map: Front & Rear Views .......1-11 FCC Statement .............II System Map: Left View ..........1-12 Instructions for Care and Operation ......IV System Map: Right View ..........1-13 Power Safety .............. VI System Map: Bottom View ..........1-14 Battery Precautions ...........VII Windows Vista Start Menu &...
  • Page 16 Preface Configuring the TouchPad and Buttons ....2-11 Proper handling of the Battery Pack ......3-13 Audio Features .............2-12 Battery FAQ ..............3-14 Adding a Printer ............2-13 Drivers & Utilities USB Printer ..............2-13 Parallel Printer ............2-13 What to Install ..............4-1 Module Driver Installation ..........4-1 Power Management Driver Installation ............4-2 Overview ................3-1...
  • Page 17 Preface Fingerprint Reader Module ........4-6 Set Supervisor Password (Security Menu) ....5-10 Password on boot: (Security Menu) ......5-11 BIOS Utilities Fixed disk boot sector: (Security Menu) ......5-11 TPM Support (Security Menu) ........5-11 Overview ................5-1 TPM State ..............5-12 The Power-On Self Test (POST) ........5-2 TPM Function (TPM State) .........5-12 Failing the POST ............5-3 Boot Menu ..............5-14...
  • Page 18 Preface PC Camera Module ............7-7 Interface (Ports & Jacks) PC Camera Driver Installation ........7-7 Overview ...............A-1 PC Camera Audio Setup ..........7-8 Notebook Ports and Jacks ..........A-2 BisonCap ..............7-10 Built-In Microphone .............A-2 Eliminating Screen Flicker ........7-11 Card Reader Port ............A-2 Bluetooth Module ............7-12 DC-In Jack ..............A-2 Bluetooth Driver Installation ........7-12 External Monitor (VGA) Port ........A-2...
  • Page 19 Preface Display Modes .............. B-8 Windows XP Start Menu & Control Panel ....D-3 Audio Features ..............D-4 Specifications Function Keys/Hot Keys ..........D-5 Application Hot Key .............D-6 Processor ............... C-1 Video Features ..............D-7 Core Logic ..............C-1 Dynamic Video Memory Technology ......D-7 Memory .................
  • Page 20 Preface Updating/Reinstalling Individual Drivers....D-25 Chipset (WinXP) ............D-26 Video (WinXP) ............D-26 Audio (WinXP) ............D-26 Modem (WinXP) ............D-26 LAN (WinXP) ............D-26 TouchPad (WinXP) ............D-27 ExpressCard/Card Reader (WinXP) ......D-27 Hot Key Utility (WinXP) ..........D-27 Module Drivers............D-27 Bluetooth Module ............D-28 Bluetooth Driver Installation ........D-28 PC Camera Module .............

  • Page 21: Quick Start Guide

    Quick Start Guide Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...

  • Page 22: Advanced Users

    Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...

  • Page 23: Model Differences

    Quick Start Guide Model Differences This notebook series includes two different model types. The models differ slightly in design style, and Model B supports a fingerprint reader module as an optional feature. Not Included Operating Systems (e.g. Windows Vista/Windows XP) and applications (e.g. word processing, spreadsheet and database programs) have their own manuals, so please consult the appropriate manuals.

  • Page 24: System Software

    Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the following operating systems are sup- ported.

  • Page 25: System Startup

    Quick Start Guide System Startup Remove all packing materials. Place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack on the right of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.

  • Page 26: System Map: Lcd Panel Open - Model A

    Quick Start Guide System Map: LCD Panel Open - Model A Figure 1 - 2 LCD Panel Open - Model A Wireless Device Optional Built-In PC Operation Aboard Aircraft Camera The use of any portable electronic transmission devices aboard air- Speakers craft is usually prohibited.

  • Page 27: System Map: Lcd Panel Open - Model B

    Quick Start Guide System Map: LCD Panel Open - Model B Figure 1 - 3 LCD Panel Open Model B Wireless Device Optional Built-In PC Operation Aboard Aircraft Camera The use of any portable electronic transmission devices aboard air- Speakers craft is usually prohibited.

  • Page 28: Led Indicators

    Quick Start Guide LED Indicators Icon Color Description The two sets of LED indicators (LED Status Indica- Green The Computer is On tors and LED Power & Communication Indicators) Blinking on the computer display helpful information about the The Computer is in Sleep Mode Green current status of the computer.

  • Page 29: Hot Key Buttons & Keyboard

    Quick Start Guide Hot Key Buttons & Keyboard The keyboard has an embedded numerical keypad for easy numeric data input, and features Function Keys to These buttons give instant access to the default Inter- allow you to change operational features instantly (see net browser and e-mail program, and to a user-defined Table 1 - 5, on page 1 - 10).

  • Page 30: Function Keys

    Quick Start Guide Function Keys To use the function keys, press and hold the Fn key, then press the appropriate function key (F1 - F12 etc.). Function Function Fn + ~ Play/Pause (in Audio/Video Programs) Fn + F7 Display Toggle Function Key Fn + F8 Decrease LCD Brightness...

  • Page 31: System Map: Front & Rear Views

    Quick Start Guide System Map: Front & Rear Views Figure 1 - 5 Front & Rear Views LED Power & Communication Indicators 7-in-1 Card Reader External Monitor Port Security Lock Slot Battery 7-in-1 Card Reader The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / SD (Secure Digital) / MS (Memory Stick) / MS Pro (Memory Stick Pro) / MS Duo (requires PC adapter) / Mini SD (requires PC adapter) / RS MMC (requires PC adapter)

  • Page 32: System Map: Left View

    Quick Start Guide System Map: Left View Figure 1 - 6 Left View RJ-45 LAN Jack Vent/Fan Intake 2 * USB 2.0 Ports S/PDIF-Out Jack Line-In Jack Mini-IEEE 1394 Port ExpressCard Slot ExpressCard Slot (see page The ExpressCard Slot accepts either ExpressCard/34 or ExpressCard/54 formats. 1 - 12 System Map: Left View...

  • Page 33: System Map: Right View

    Quick Start Guide System Map: Right View Figure 1 - 7 Right View Headphone-Out Jack Microphone-In Jack USB 2.0 Port RJ-11 Phone Jack Optical Device Changing DVD Regional Codes CD Emergency Eject Drive Bay (for CD/ Go to the Control Panel and double-click If you need to manually eject a CD/DVD DVD Device - see Device Manager (Hardware and Sound),...

  • Page 34: System Map: Bottom View

    Quick Start Guide System Map: Bottom View Figure 1 - 8 Bottom View Vent/Fan Intake Battery Module Bay Cover The CPU is not a user serviceable part. Opening this compartment, Hard Disk Cover or accessing the CPU in any way, may violate your warranty.

  • Page 35: Windows Vista Start Menu & Control Panel

    Quick Start Guide Windows Vista Start Menu & Control Panel Most of the control panels, utilities and programs within Windows Vista (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 36: Video Features

    Quick Start Guide Video Features You can switch display devices, and configure display options, from the Display Settings control panel (in Per- sonalization) in Windows Vista as long as the appropriate Intel video driver is installed. For more detailed vid- eo information see “Intel Video Driver Controls”...
  • Page 37 Quick Start Guide Figure 1 - 10 - Display Properties Desktop Intel Display Mode Description Single Mode One of the connected displays is used as the display device Intel(R) Dual Display Clone Mode Both connected displays output the same view and may be configured independently Extended Desktop Mode Both connected displays are treated as separate devices, and act as a virtual desktop Table 1 - 6 - Display Options...

  • Page 38: Power Options

    Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 15) allows you to configure power management features for your computer. You can conserve power by means of power plans and configure the options for the power button, sleep button, computer lid (when closed), display and sleep mode from the left menu.

  • Page 39: Features & Components

    Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard Disk Drive • Optical (CD/DVD) Device • 7-in-1 Card Reader • ExpressCard Slot •...

  • Page 40: Hard Disk Drive

    Features & Components Hard Disk Drive The hard disk drive is used to store your data in the computer. The hard disk can be Power Safety taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5 mm.

  • Page 41: Optical (Cd/Dvd) Device

    Features & Components Optical (CD/DVD) Device There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height). The actual de- Sound Volume vice will depend on the module you purchased (see “Storage” on page C - 2). The Adjustment optical device is usually labeled “Drive D:”...

  • Page 42: Handling Cds Or Dvds

    Features & Components Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually eject a CD (e.g.

  • Page 43: Dvd Regional Codes

    Features & Components DVD Regional Codes To change the DVD regional codes see “Changing DVD Regional Codes” on page 1 - DVD Regional Coding Table 2 - 1 DVD Regional Coding Region Geographical Location USA, Canada Western Europe, Japan, South Africa, Middle East &...

  • Page 44: 7-In-1 Card Reader

    Features & Components 7-in-1 Card Reader The card reader allows you to use some of the latest digital storage cards. Push the Card Reader Cover card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s).

  • Page 45: Expresscard Slot

    Features & Components ExpressCard Slot The computer is equipped with an ExpressCard/34/54 slot that reads Express Card/ ExpressCard Slot 34 and ExpressCard/54 formats. ExpressCards are the successors to PCMCIA (PC Cover Cards). Make sure you keep the ExpressCard/54 is used for applications which require a larger interface slot, e.g. cover in the Express- CompactFlash card reader.

  • Page 46: Function Keys/Hot Keys

    Features & Components Function Keys/Hot Keys The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn Hot Key Driver key is held down. In addition to the basic function key combinations; visual indica- tors (see the table below) are available when the hot key utility is installed (see “Hot Double-click the icon...

  • Page 47: Application Hot Key

    Features & Components Application Hot Key To configure a program to open when the application hot key button is pressed (follow the instructions below. Application.exe Double-click the hot key driver icon in the taskbar. You will need to locate Click Launch user specified application (button) the actual application executable (.exe) file, not just the shortcut.

  • Page 48: Mail Checker

    Features & Components Mail Checker After you have installed the driver for the Mail Checker program (see “AutoMail” Note on page 4 - 6) you may then configure it to give you notification when you receive new mail (you may configure a Wave for audible notification and the Mail LED Check with your Internet will give visual notification when mail is received).

  • Page 49: Touchpad And Buttons/Mouse

    Features & Components TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to Mouse Driver your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. If you are using an exter- nal mouse your operat- Configuring the TouchPad and Buttons...

  • Page 50: Audio Features

    Features & Components Audio Features You can configure the audio options on your computer from the Sound control Sound Volume panel in Windows, or from the Realtek HD Audio Manager icon in the taskbar/ Adjustment control panel (right-click the taskbar icon to bring up an audio menu).

  • Page 51: Adding A Printer

    Features & Components Adding a Printer The most commonly used peripheral is a printer. The following conventions will Parallel Printer help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options. After setting up the print- er attach the parallel ca- USB Printer...
  • Page 52 Features & Components 2 - 14...

  • Page 53: Power Management

    Power Management Chapter 3: Power Management Overview OS Note Power management To conserve power, especially when using the battery, your computer power man- functions will vary slight- agement conserves power by controlling individual components of the computer ly depending on your (the monitor and hard disk drive) or the whole system.

  • Page 54: The Power Sources

    Power Management The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/ DC adapter will damage the computer and its components (see page Attach the AC/DC adapter to the DC-In jack at the rear of the computer.

  • Page 55: Turning On The Computer

    Power Management Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the pow- Shut Down er button on the front panel. Note that you should al- When the computer is on, you can use the power button as a Sleep/Hibernate hot- ways shut your comput- er down by choosing the key button when it is pressed for less than 4 seconds (pressing and holding the power...

  • Page 56: Power Plans

    Power Management Power Plans The computer can be configured to conserve power by means of power plans. You Resuming can use (or modify) an existing power plan, or create a new one. Operation The settings may be adjusted to set the display to turn off after a specified time, and Table 3 - 1, on to send the computer into Sleep after a period of inactivity.
  • Page 57 Power Management Each Windows Power Plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose High performance for maximum performance when the computer is pow- ered from an AC power source.

  • Page 58: Power-Saving States

    Power Management Power-Saving States You can use power-saving states to stop the computer’s operation and restart where Power Button you left off. Sleep is the default power-saving state in Windows Vista. The Power Button Earlier versions of Windows used Stand By and Hibernate as system power-saving in the Start Menu (in Classic View use the states.

  • Page 59: Hibernate

    Power Management Hibernate Hibernate uses the least amount of power of all the power-saving states and saves all of your information on a part of the hard disk before it turns the system off. If a power failure occurs the system can restore your work from the hard disk; if a power failure occurs when work is saved only to memory, then the work will be lost.

  • Page 60: Configuring The Power Buttons

    Power Management Configuring the Power Buttons The power/sleep button (Fn + F4 key combo) and closed lid may be set to send the Password computer in to a power-saving state. Protection It is recommended that you enable a password on wake up in order to protect your data.

  • Page 61: Resuming Operation

    Power Management Resuming Operation You can resume operation from power-saving states by pressing the power button, or in some cases pressing the sleep button (Fn + F4 key combo). Closing the Lid If you have chosen to Power Status To Resume Icon Color send the computer to...

  • Page 62: Battery Information

    Power Management Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery Warning Battery Power When the battery is criti- Your computer’s battery power is dependent upon many factors, including the pro- cally low, immediately grams you are running, and peripheral devices attached.

  • Page 63: Conserving Battery Power

    Power Management Conserving Battery Power • Use a power plan that conserves power (e.g Power saver), however note that Windows Mobility this may have an affect on computer performance. Center • Lower the brightness level of the LCD display. The system will decrease LCD Windows Mobility brightness slightly to save power when it is not powered by the AC/DC adapter.

  • Page 64: Battery Life

    Power Management Battery Life Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to re- move the battery for any reason see “Removing the Battery”...

  • Page 65: Proper Handling Of The Battery Pack

    Power Management Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode Caution • DO NOT connect the metal terminals (+, -) to each other Danger of explosion if battery is incorrectly re- placed.

  • Page 66: Battery Faq

    Power Management Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 67 Power Management Scroll down to Battery and click + to expand the battery options. Choose the options below (click Yes if a warning appears): Figure 3 - 8 Power Options Advanced Settings - Battery • Low battery levels = 0% •...
  • Page 68 Power Management How do I fully charge the battery? When charging the battery, don’t stop until the LED charging indicator light changes from orange to green. How do I maintain the battery? Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges.

  • Page 69: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities What to Install This chapter deals with installing the drivers and utili- ties essential to the operation or improvement of some The Device Drivers & Utilities + User’s Manual CD- of the computer’s subsystems. The system takes ad- ROM contains the drivers and utilities necessary for vantage of some newer hardware components for the proper operation of the computer.

  • Page 70: Driver Installation

    Drivers & Utilities Driver Installation Check the driver installation order from Table 4 - 1, on page 4 - 3 (the drivers must be installed in Insert the Device Drivers & Utilities + User’s Manual this order) which is the same as that listed in the CD-ROM and click Install Drivers (button)/Option Drivers Installer menu below.

  • Page 71: Manual Driver Installation

    Drivers & Utilities Manual Driver Installation Click the Browse CD button in the Drivers Installer application and browse to the executable file in the appropriate driver folder. Driver Page Page 4 - 5 Video (VGA) Page 4 - 5 Audio Modem Page 4 - 5 Page 4 - 5...

  • Page 72: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Updating/Reinstalling Individual Drivers User Account Control (Win Vista) If you wish to update/reinstall individual drivers it If a User Account Control prompt appears as part of may be necessary to uninstall the original driver.To do the driver installation procedure, click Continue or this go to the Control Panel in the Windows OS and Allow, and follow the installation procedure as direct- double-click the Programs and Features icon (Pro-...

  • Page 73: Driver Installation Procedure

    Drivers & Utilities Driver Installation Procedure 1. Click 4.Install Lan Driver > Yes. Video (VGA) 2. Click Next > Install. 1. Click 1.Install VGA Driver > Yes. 3. Click Finish. 2. Click Next > Yes > Next > Next. TouchPad 3.

  • Page 74: Hot Key

    Drivers & Utilities Hot Key Wireless LAN Module 1. Click 7.Install HOTKEY Driver > Yes. See the introduction in “Wireless LAN Module” on page 7 - 2, and check the installation procedure. 2. Click Next > Install. 3. Click Finish > Finish to restart your computer. PC Camera Module 4.

  • Page 75: Bios Utilities

    BIOS Utilities Chapter 5: BIOS Utilities Overview BIOS Settings Warning This chapter gives a brief introduction to the computer’s built-in software: Incorrect settings can cause your system to Diagnostics: The POST (Power-On Self Test) malfunction. To correct mistakes, return to Set- up and restore the Set- Configuration: The Setup utility up Defaults with <F9>.

  • Page 76: The Power-On Self Test (Post)

    BIOS Utilities The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to conduct a POST Screen POST, including a quick test of the on-board RAM (memory). 1.BIOS information As the POST proceeds, the computer will tell you if there is anything wrong. If there 2.CPU type is a problem that prevents the system from booting, it will display a system summary 3.Memory status...

  • Page 77: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non- fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized service center as soon as possible.

  • Page 78: The Setup Program

    BIOS Utilities The Setup Program The Phoenix Setup program tells the system how to configure itself and manage ba- sic features and subsystems (e.g. port configuration). Entering Setup To enter Setup, turn on the computer and press F2 during the POST. The prompt (Press F2 to Enter Setup) seen on page 5 - 2 is usually present for a few seconds...

  • Page 79: Setup Screens

    BIOS Utilities Setup Screens The following pages contain additional advice on portions of the Setup. Setup Menus Along the top of the screen is a menu bar with menu headings. When you select a Setup menus heading, a new screen appears. Scroll through the features listed on each screen to shown in this section are make changes to Setup.

  • Page 80: Main Menu

    BIOS Utilities Main Menu Phoenix TrustedCore(tm) Setup Utility Figure 5 - 2 Main Main Advanced Security Boot Exit Main Menu Item Specific Help BIOS Revision: ********* System Time: [22:12:05] <Tab>, <Shift Tab>, or System Date: [04/17/2007] <Enter> selects field. IDE Primary/Master [FUJITSU MHV2100BH PL-(S1)] IDE Secondary/Master [Optiarc CD-RW CRX880A-(SM]...

  • Page 81: Ide Primary/Master (Main Menu)

    BIOS Utilities IDE Primary/Master (Main Menu) Pressing Enter opens the sub-menu to show the configuration of a HDD on the com- puter’s IDE Primary/Master Channel. Use the Auto (Type:) setting to have the items configured automatically for you. IDE Secondary/Master (Main Menu) Pressing Enter opens the sub-menu to show the configuration of an optical Device on the computer’s IDE Channel 1.

  • Page 82: Advanced Menu

    BIOS Utilities Advanced Menu Figure 5 - 3 Phoenix TrustedCore(tm) Setup Utility Advanced Menu Main Advanced Advanced Security Boot Exit Item Specific Help Reset Configuration Data: [No] Select 'Yes' if you Local Bus IDE Adapter: [Both] want to clear the Extended System Boot-time Diagnostic Screen: [Enabled]...

  • Page 83: Local Bus Ide Adapter: (Advanced Menu)

    BIOS Utilities Local Bus IDE adapter: (Advanced Menu) This item allows you to configure the IDE bus which controls the hard disk and op- tical devices. It is set to “Both” by default. Boot-time Diagnostic Screen: (Advanced Menu) Use this menu item to enable/disable the Boot-time Diagnostic Screen. Legacy USB Support: (Advanced Menu) Use this menu item to enable/disable the support for Legacy Universal Serial Bus.

  • Page 84: Security Menu

    BIOS Utilities Security Menu Phoenix TrustedCore(tm) Setup Utility Security Menu Main Advanced Security S S e e c c u u r r i i t t y y Boot Exit changes Item Specific Help Supervisor Password Is: Clear make here affect the access to the Setup Set Supervisor Password [Enter]...

  • Page 85: Password On Boot: (Security Menu)

    BIOS Utilities Password on boot: (Security Menu) Specify whether or not a password should be entered to boot the computer (you may only set a password on boot if a supervisor password is enabled). If “Enabled” Password Warning is selected, only users who enter a correct password can boot the system (see the If you set a boot pass- warning in the sidebar).

  • Page 86: Tpm State

    BIOS Utilities TPM State Phoenix TrustedCore(tm) Setup Utility TPM State Menu Main Advanced Security Boot Exit TPM State Item Specific Help To access this menu you must first enable Current TPM State: Enabled and Deactivated TPM support from the Changes TPM State security menu (see...
  • Page 87 BIOS Utilities If you have made any changes to the TPM State you will be asked to execute or reject the changes made after you have saved and exited the BIOS. Highlight the required option (it will be white), and then press Enter to save it. Phoenix TrustedCore(tm) Setup Utility Figure 5 - 6 Physical Presence operations...

  • Page 88: Boot Menu

    BIOS Utilities Boot Menu Phoenix TrustedCore(tm) Setup Utility Figure 5 - 7 Main Advanced Security Boot Exit Boot Menu Item Specific Help Boot priority order: USB FDC: Keys used to view or IDE CD: Optiarc CD-RW CRX880A-(SM) configure devices: IDE HDD: FUJITSU MHV2100BH PL-(S1) Up and Down arrows USB HDD:...

  • Page 89: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 8 Phoenix TrustedCore(tm) Setup Utility Main Advanced Security Boot Exit Exit Menu Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and Load Setup Defaults save your changes to Discard Changes CMOS.
  • Page 90 BIOS Utilities 5 - 16...

  • Page 91: Upgrading The Computer

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps out- lined to make the desired upgrades. If you have any trouble or problems you can con- Warranty Warning tact your service representative for further help. Before you begin you will need: Please check with your service representative...

  • Page 92: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake upgrade proce- • Your system is still under warranty or a service contract dures, make sure that •...

  • Page 93: Removing The Battery

    Upgrading The Computer Removing the Battery If you are confident in undertaking upgrade procedures yourself, for safety reasons Warranty Warning it is best to remove the battery. Turn the computer off, and turn it over. Please check with your Slide the latch in the direction of the arrow, and hold it in place.
  • Page 94 Upgrading The Computer Lift the battery up and out in the direction of the arrow Figure 6 - 2 Battery Removal Insert the battery by pushing it straight down into the battery bay (it will only fit one way, don’t force it). Make sure the battery is sitting flat in the slot, and then slide the battery in the direction of the arrow until the lock clicks into place.

  • Page 95: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard HDD System disk drives with a height of 9.5mm (h) (see “Storage” on page C - 2). Follow your Warning operating system’s installation instructions, and install all necessary drivers and util- ities (as outlined in...
  • Page 96 Upgrading The Computer Pull the tab to slide the hard disk and case assembly in the direction of arrow Lift the hard disk and case assembly out of the bay in the direction of arrow Remove screws to release the hard disk from the case , and reverse the process to install any new hard disk.

  • Page 97: Upgrading The Optical (Cd/Dvd) Device

    Upgrading The Computer Upgrading the Optical (CD/DVD) Device Turn off the computer, and turn it over and remove the battery. Locate the module bay cover and remove screws Remove the bay cover Use a screwdriver to carefully push out the optical device at point Reverse the process to install the new device.

  • Page 98: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO- DIMM) DDRII (DDR2) type memory modules (see “Memory” on page C - 1 details of supported module types). The total memory size is automatically detected by the POST routine once you turn on your computer.
  • Page 99 Upgrading The Computer Gently pull the two release latches on the sides of the memory socket in the direction indicated by the arrows ( & Figure 6 - Contact Warning Be careful not to touch the metal pins on the module’s connecting edge.

  • Page 100: Upgrading The Processor

    Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a fast- Warranty er/new one you will need to contact your customer service representative. We rec- ommend that you do not do this yourself, since if it is done incorrectly you may The CPU is not a user damage the processor or mainboard.

  • Page 101: Modules & Options

    Modules & Options Chapter 7: Modules & Options Wireless Device Overview Operation Aboard This chapter contains information on the following modules, which may come with Aircraft your computer, depending on the configuration purchased. If you are unsure please The use of any portable contact your service representative.

  • Page 102: Wireless Lan Module

    Modules & Options Wireless LAN Module If you have included an Intel PRO/Wireless 3945ABG (802.11a/b/g), Intel PRO/ Wireless Device Wireless 4965ABN (802.11a/g/n) PCIe WLAN module or 802.11 b/g USB WLAN Operation Aboard module in your purchase option, make sure that the Wireless LAN module is on. Use Aircraft the Fn + F11 key combination (see Table 1 - 5, on page 1 -...

  • Page 103: Connecting To A Wireless Network

    Modules & Options Connecting to a Wireless Network Make sure the Wireless LAN module is turned on. Click the taskbar wireless icon , and then click Connect to a network (or right- click the icon , and then click Connect to a network). Figure 7 - 1 Taskbar Menus Click icon...
  • Page 104 Modules & Options Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network).
  • Page 105 Modules & Options To disconnect from the wireless network you can click the taskbar wireless icon , and then select Connect or disconnect to access the network menu, and click Disconnect (or right-click the icon , and then click Disconnect from). Security Enabled Networks You should try to make...

  • Page 106: Windows Mobility Center

    Modules & Options Windows Mobility Center The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. To access the Windows Mobility Center: Click Start, and click Control Panel (or point to Settings and click Control Panel).

  • Page 107: Pc Camera Module

    Modules & Options PC Camera Module Before installing the PC Camera driver, make sure that the optional PC Camera is Latest PC Camera on. Use the Fn + F10 key combination (see Table 1 - 5, on page 1 - 10) to toggle Driver Information power to the PC Camera module.

  • Page 108: Pc Camera Audio Setup

    Modules & Options PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Click Start, and click Control Panel (or point to Settings and click Control Panel).
  • Page 109 Modules & Options Figure 7 - 7 Audio Setup for PC Camera Right-click PC Camera Module 7 - 9...

  • Page 110: Bisoncap

    Modules & Options BisonCap BisonCap is a video viewer useful for general purpose video viewing and testing, and can capture video files to .avi format. Pre-Allocating File Space Run the BisonCap program from the Start > Programs/All Programs > Bison- You may pre-allocate Cam menu (it is recommended that you set the capture file before the capture the file size for the cap-...

  • Page 111: Eliminating Screen Flicker

    Modules & Options Eliminating Screen Flicker If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. Run the BisonCap program. Go to Options and scroll down to select “Video Capture Filter...”. Click either 50Hz or 60Hz under Frequency in Property Page (tab).

  • Page 112: Bluetooth Module

    Modules & Options Bluetooth Module The optional Bluetooth module allows you to connect your computer to Bluetooth Wireless Device enabled devices such as other computers, desktop computers, mobile phones, print- Operation Aboard ers, digital cameras, PDAs, headsets etc. using a short-range radio frequency. Aircraft Use the Fn + F12 key combination (see Table 1 - 5, on page 1 -...
  • Page 113 Modules & Options User Guides & Help View BlueSoleil User Guides from the Help Menu (or press the F1 key) in the IVT Cor- poration BlueSoleil - Main Window control panel. Click the Help menu select Contents and Index. Look through Getting Started or select the ap- propriate User Guide...

  • Page 114: Bluetooth Local Area Connection

    Modules & Options Bluetooth Local Area Connection You can check the Bluetooth connection status from the Network and Sharing Center: Disconnecting Use the Fn + F12 key combination to turn on the Bluetooth module. In order to have the Local Area Connection icon dis- Run the IVT Corporation BlueSoleil program from the desktop icon or Start menu.
  • Page 115 Modules & Options Do not use the close button or Fn + F12 key combination before clicking File > Exit or the correct status will not be displayed. You can then use the Fn + F12 key combination to turn off the Bluetooth module (check the LED icon for the Bluetooth module power status).

  • Page 116: Security Modules (Tpm & Fingerprint)

    Modules & Options Security Modules (TPM & Fingerprint) The encrypted channel between the Trusted Platform Module security chip and Password Warning the optional fingerprint reader (an option for Model B computers only) with Pro- tector Suite Software provides a high level of security for your computer. A further If you set passwords for level of security and control is provided in the BIOS (see “Security Menu”...

  • Page 117: Trusted Platform Module

    Modules & Options Trusted Platform Module Before setting up the TPM functions you must initialize the security platform. Enabling & Activating TPM Restart the computer. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST. Use the arrow keys to select the Security menu. Select TPM Support and set the item to Enabled.

  • Page 118: 7 - 18 Trusted Platform Module

    Modules & Options Use the arrow keys to select the TPM State menu. Select TPM State, and set the item to Enable & Activate. Phoenix TrustedCore(tm) Setup Utility Figure 7 - 13 Main Advanced Security Boot Exit TPM State TPM State Item Specific Help Current TPM State: Enabled and Deactivated...

  • Page 119: Tpm Module Driver Installation

    Modules & Options TPM Module Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (Win Vista) into the CD/DVD drive. Password Warning 2. Click Option Drivers (button). Do not lose the pass- 3. Click 4.Install TPM Driver > Yes. word.

  • Page 120: Initializing Tpm

    Modules & Options Initializing TPM To initialize the TPM it may be necessary to first clear any existing TPM informa- tion if applicable. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST. Use the arrow keys to select the TPM State menu. Select TPM State, and set the item to Clear.
  • Page 121 Modules & Options Run the application from the Infineon Security Platform Solution > Manage Security Platform item in the Start > Programs/All Programs menu. Right-click the taskbar icon and select Security Platform Initialization (or click the Security Platform State taskbar bubble). Automatic Backup Click Next >...
  • Page 122 Modules & Options 23. Choose (click Select to browse to any file supplied by your system administrator or create your own) an Encryption Certificate. 24. If the system administrator has not provided you with a certificate you can click Create to create a certificate for file encryption. Figure 7 - 15 Certificate Selection...

  • Page 123: Infineon Security Platform Settings Tool

    Modules & Options Infineon Security Platform Settings Tool The Infineon Security Platform Settings Tool allows you to manage and check the TPM state, manage your password information, and to backup and restore the TPM Help data. As TPM is usually administered within large enterprises and organizations, Right-click the taskbar icon your system administrator will need to assist you in managing the information here.

  • Page 124: Fingerprint Reader Module

    Modules & Options Fingerprint Reader Module If you have included the fingerprint reader in your purchase option (for Model B Help & Manual computers only) you will need to install the driver as per the instructions below. Right-click the taskbar icon Make sure you have administrator’s rights to your computer, and have a Windows to bring up the menu to password enabled for full security protection.

  • Page 125: User Enrollment

    Modules & Options User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon On the first run of the program you will be asked to click the button to accept the license, and then click OK.
  • Page 126 Modules & Options Click the button above any of the fingers to begin the enrollment process for that finger. 10. Swipe the finger three times to enroll that finger. Fingerprint 11. Repeat the process for all the fingers you wish to enroll (see sidebar), and then Enrollment click Next.
  • Page 127 Modules & Options Protector Suite QL TPM Initialization After the restart the computer will then show the message “Invalid TPM Status” (if you have included the TPM module in your purchase option and initialized the Figure 7 - 19 TPM). TPM Invalid Click Next.
  • Page 128 Modules & Options Fingerprint Control Center Right-click the taskbar icon to bring up the menu that allows you to Edit Fin- gerprints, Start Control Center, access the Help menu etc. You can also run the Control Center etc. from the Protector Suite QL item in the Programs/All Pro- grams menu.

  • Page 129: Troubleshooting

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 130: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 131: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.

  • Page 132: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.

  • Page 133: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 134 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 135: Problems & Possible Solutions

    Troubleshooting Problems & Possible Solutions Problem Possible Cause - Solution You turned on the power Battery missing / incorrectly installed. Check the battery bay, make sure the battery is present and but it doesn’t work. seated properly (the design of the battery only allows it to go in one way). Make sure there’s nothing interfering with the battery contacts.
  • Page 136 Troubleshooting Problem Possible Cause - Solution The computer feels too Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this hot. doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating”...
  • Page 137 Troubleshooting Problem Possible Cause - Solution forget boot If you forget the password, you may have to discharge the battery of the CMOS. Contact your password. service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 138 Troubleshooting Problem Possible Cause - Solution Unwelcome numbers If the LED is lit, then Num Lock is turned ON. (see “LED Indicators” on page 1 - appear when typing. Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically.

  • Page 139: Interface (Ports & Jacks)

    Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Interface (Ports & Jacks) A - 1...

  • Page 140: Notebook Ports And Jacks

    Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Built-In Microphone The built-in microphone allows you to record on your computer Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device.

  • Page 141: Microphone-In Jack

    Interface (Ports & Jacks) Item Description Microphone-In Jack Plug an external microphone in to this jack to record on your computer. Mini-IEEE 1394 Port This port allows a high-speed connection to various peripheral devices, e.g. external disk drives and digital cameras (see note below). Mini-IEEE 1394 Port The Mini-IEEE 1394 port only supports SELF POWERED IEEE 1394 devices.

  • Page 142: S/Pdif-Out Jack

    Interface (Ports & Jacks) Item Description S/PDIF-Out Jack This S/PDIF (Sony/Philips Digital Interface Format) Out Jack allows you to connect your DVD- capable PC to a Dolby AC-3 compatible receiver for “5.1” or ‘dts’ surround sound. USB 2.0/1.1 Ports These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed peripherals such as keyboards, mice or scanners, and for high-speed peripherals such as external HDDs, digital video cameras or high-speed scanners etc.

  • Page 143: Intel Video Driver Controls

    Intel Video Driver Controls Appendix B: Intel Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - Intel Video Driver Installation DVMT Notes Make sure you install all the drivers in the order indicated in Table 4 - 1, on page 4 - DVMT is not local video memory.

  • Page 144: B - 2 Intel Graphics Properties

    Intel Video Driver Controls Intel Graphics Properties More advanced video configuration options are provided by the Intel(R) Graphics Taskbar Icon Media Accelerator Driver for Mobile. The Intel GMA control Open the Display Settings control panel (see “Video Features” on page 1 - panel can also be ac- and click Advanced Settings (button).
  • Page 145 Intel Video Driver Controls You may make changes to the devices, color, schemes, Hot Keys etc. by clicking the appropriate menu item or button. Click Information (button) to obtain useful in- formation about the graphics properties of the computer, and see the Support tab in Help Menus Information to get weblinks to the latest information on the Intel Website.

  • Page 146: Scheme Options

    Intel Video Driver Controls Scheme Options Use Scheme Options to configure quick settings for applications which require spe- cific resolution and color settings in order to run properly e.g. games, multimedia Application.exe programs. To set the scheme options: You will need to locate the actual application Open the Display Settings control panel and click Advanced Settings (button).

  • Page 147: Display Devices

    Intel Video Driver Controls Display Devices Besides the built-in LCD, you can also use an external monitor/flat panel display as Function Key your display device. The following are the display options: Combination The built-in LCD OR an external monitor/flat panel display connected to the exter- You can use the Fn + F7 nal monitor port (Single Display).

  • Page 148: B - 6 Attaching Other Displays

    Intel Video Driver Controls Attaching Other Displays If you prefer to use a monitor or flat panel display, connect it to the external monitor port at the rear of the computer. Windows Vista Attach your external display to the external monitor port, and turn it on. If a New Display Detected window does not appear in Windows Vista, go to the Windows Mobility Center control panel (Mobile PC >...
  • Page 149 Intel Video Driver Controls ® Intel GMA Driver for Mobile Go to the Intel Graphics Properties control panel (see “Intel Graphics Proper- ties” on page B - 2) and click Display Devices. Multiple Display Click to choose the display option from the Multiple Display menu. Click Apply (and OK to confirm the settings change) and OK (button).

  • Page 150: Display Modes

    Intel Video Driver Controls Display Modes Single Display Only one of your attached displays is used. Intel(R) Dual Display Clone (mirrored) This mode will drive multiple displays with the same content. Each device may be configured independently for different resolutions, refresh rates, color quality etc. Use this feature to display the screen through a projector for a presentation.
  • Page 151 Intel Video Driver Controls To Enable Intel(R) Dual Display Clone Attach your external monitor to the external monitor port, and turn it on. Go to the Intel Graphics Properties control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices. Click to choose Intel(R) Dual Display Clone (Multiple Display).
  • Page 152 Intel Video Driver Controls To Enable Extended Desktop Attach your external monitor to the external monitor port, and turn it on. Go to the Intel Graphics Properties control panel (see “Intel Graphics Display Settings Properties” on page B - 2) and click Display Devices. Extended Desktop Click to choose Extended Desktop (Multiple Display).
  • Page 153 Intel Video Driver Controls Using Windows Vista to Enable Extended Mode Attach your external display to the external monitor port, and turn it on. If a New Display Detected window does not appear in Windows Vista, go to the Display Settings Windows Mobility Center control panel (Mobile PC >...
  • Page 154 Intel Video Driver Controls Using Display Settings to Enable Extended Mode Attach your external display to the external monitor port, and turn it on. Open the Display Settings control panel (see “Video Features” on page 1 - 16). Click the monitor icon (e.g. ), and make sure you have checked “Extend my Windows desktop onto this monitor.”...

  • Page 155: Specifications

    Specifications Appendix C: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed or updated due to the manufacturer's release schedule. Check with your service center for details.

  • Page 156: Security

    Specifications Feature Specification Security Security (Kensington® Type) Lock Slot BIOS Password (Factory Option) Trusted Platform Module (Factory Option for Model B Only) Fingerprint Reader Module BIOS One 8Mb Flash ROM Phoenix™ BIOS 14.1" WXGA (1280*800) Flat Panel TFT Video Adapter Intel GM965 Integration Supports Dynamic Video Memory Technology DVMT (up to 256MB dynamically allocated from system memory where needed)

  • Page 157: Interface

    Specifications Feature Specification Interface Three USB 2.0 Ports One RJ-11 Jack for Plug & Play Fax/Modem One External Monitor Port One RJ-45 Jack for 10Mb/ 100Mb/ 1000Mb Fast One Headphone-Out Jack Ethernet One Microphone-In Jack One Mini-IEEE 1394 Port One Line-In Jack One DC-in Jack One S/PDIF Output Jack Card Reader...

  • Page 158: Power Management

    Specifications Feature Specification Power Supports ACPI 2.0 Supports Battery Low Suspend Management Supports Suspend to RAM (S3) Supports Resume from Modem Ring Supports Suspend to Disk (S4) Supports Wake on LAN Supports Soft Off (S5) Power Full Range AC/DC Adapter 19V, 3.42A OR 18.5V, 3.5A, 100 - 240V, 50 - 60Hz 6 Cell Smart Lithium-Ion Battery Pack, 4000mAH (44.4W) 6 Cell Smart Lithium-Ion Battery Pack, 4400mAH (48.8W) Environmental...

  • Page 159: Windows Xp Information

    Windows XP Information Appendix D: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS. D - 1...

  • Page 160: Dvd Regional Codes

    Windows XP Information DVD Regional Codes Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.

  • Page 161: Windows Xp Start Menu & Control Panel

    Windows XP Information Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 162: D - 4 Audio Features

    Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows con- trol panel, or from the Realtek HD Audio Manager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus).

  • Page 163: Function Keys/Hot Keys

    Windows XP Information Function Keys/Hot Keys The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators (see the table below) are available when the hot key utility is installed (see “Hot Key Utility (WinXP)”...

  • Page 164: Application Hot Key

    Windows XP Information Application Hot Key To configure a program to open when the application hot key button is pressed, follow the instructions below. Application.exe 1. Double-click the hot key icon in the taskbar. You will need to locate 2. Click Launch user specified application (button) the actual application executable (.exe) file, not just the shortcut.

  • Page 165: Video Features

    Windows XP Information Video Features Your computer has built-in Intel (Intel GM965) video. You can switch display devices, and configure display options, from the Display Properties control panel in Windows as long as the appropriate video driver is in- stalled. To access Display Properties in Windows: Click Start, point to Settings and click Control Panel (or just click Control Panel).

  • Page 166: Display & Graphics Properties

    Windows XP Information Display & Graphics Properties Taskbar Icon You can also access the controller prop- erties from the taskbar. Click on the icon to bring up the menu and scroll to Graphics Properties. If you cannot see the tray icon go to the Intel(R) Graphics Media Accelerator Driver for Mobile tab and click the “Show Tray Icon”...
  • Page 167 Windows XP Information You may make changes to the devices, color, schemes, Hot Keys etc. by clicking the appropriate menu item or button. Click Information (button) to obtain useful information about the graphics properties of the computer, and see the Support tab in Information to get weblinks to the latest information on the Intel Website. Function Key Combination You can use the Fn + F7 key combination to toggle through...

  • Page 168: Display Devices & Options

    Windows XP Information Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.

  • Page 169: Attaching Other Displays

    Windows XP Information Attaching Other Displays If you prefer to use a monitor or flat panel display, connect it to the external monitor port at the rear of the com- puter. Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices.
  • Page 170 Windows XP Information To Enable Intel(R) Dual Display Clone (Intel GMA) Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices. Click to choose Intel(R) Dual Display Clone (Multiple Display). Click Apply, and OK to confirm the settings change.
  • Page 171 Windows XP Information To Enable Extended Desktop (Intel GMA) Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices. Click to choose Extended Desktop (Multiple Display). Click Apply, and OK to confirm the settings change.
  • Page 172 Windows XP Information To Enable Extended Desktop (Windows Display Properties) Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes).

  • Page 173: Power Management Features

    Windows XP Information Power Management Features The Power Options control panel icon in Windows (see page 3) allows you to configure power management features for your computer. You may conserve power through individual components such as the monitor or hard disk, or you may use either Stand by or Hibernate mode to conserve power throughout the system.

  • Page 174: System Power Options

    Windows XP Information Each Windows Power Scheme will also adjust the processor performance of your machine in order to save pow- er. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose the Home/Office Desk scheme for maximum performance when the computer is powered from an AC power source.

  • Page 175: Stand By

    Windows XP Information Stand by Stand by saves the least amount of power, but takes the shortest time to return to full operation. During Stand by the hard disk is turned off, and the CPU is made to idle at its slowest speed. All open applications are retained in memory.

  • Page 176: Configuring The Power Buttons

    Windows XP Information Configuring the Power Buttons The power button may be set to send the computer in to either Stand by or Hibernate mode. In Stand by mode, the LED will blink green. In Hibernate mode the LED will be off (battery) or orange (AC/DC adapter). If you are in a power saving mode set to save power through individual components (e.g.

  • Page 177: Battery Information

    Windows XP Information Battery Information Please follow these simple guidelines to get the best use out of your battery. New Battery Always completely discharge, then fully charge, a new battery (see “Battery FAQ” on page D - 22). Battery Life Your computer’s battery life is dependent upon many factors, including the programs you are running, and pe- ripheral devices attached.

  • Page 178: Recharging The Battery With The Ac/Dc Adapter

    Windows XP Information Battery life may be shortened through improper maintenance. To optimize the life and improve its perfor- mance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to remove the battery for any reason “Removing the Battery”...

  • Page 179: Proper Handling Of The Battery Pack

    Windows XP Information Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode • DO NOT connect the metal terminals (+, -) to each other Damaged Battery Warning Should you notice any physical defects (e.g.

  • Page 180: Battery Faq

    Windows XP Information Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer by yourself even when you see a message that indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.

  • Page 181: Driver Installation

    Windows XP Information Driver Installation 1. Check the driver installation order from Table (the drivers must be installed in this order) which is the Insert the Device Drivers & Utilities + User’s Manual same as that listed in the Drivers Installer menu below.

  • Page 182: Installation Methods (Win Xp

    Windows XP Information Installation Methods (Win XP) Click the Browse CD button in the Drivers Installer application and browse to the executable file in the appropriate driver folder. WinXP SP2 Driver Page # Chipset Page - 26 Video Page - 26 Audio Page - 26 Modem...

  • Page 183: Updating/Reinstalling Individual Drivers

    Windows XP Information Updating/Reinstalling Individual Drivers If you wish to update/reinstall individual drivers it may be necessary to uninstall the original driver.To do this go Windows XP Service Pack 2 to the Control Panel in the Windows OS and double- Make sure you install Windows XP Service Pack 2 (or a click the Add/Remove Programs item.

  • Page 184: Chipset (Winxp

    Windows XP Information Chipset (WinXP) Modem (WinXP) 1. Click 1.Install Chipset Driver > Yes. 1. Click 4.Install Modem Driver > Yes. 2. Click Next > Yes > Next. 2. Click OK. 3. Click Finish to restart the computer. 3. The modem is ready for dial-up configuration. Video (WinXP) 1.

  • Page 185: Touchpad (Winxp

    Windows XP Information TouchPad (WinXP) Module Drivers 1. Click 6.Install TouchPad Driver > Yes. See the following pages for the driver installation pro- cedures for any of the optional modules included in 2. Click Next > Next > Next. 3. Click Finish to restart the computer. your purchase configuration.

  • Page 186: D - 28 Bluetooth Module

    Windows XP Information Bluetooth Module Before installing the Bluetooth driver, use the Fn + F12 key combination to toggle Wireless Device power to the module. Operation Aboard Aircraft Bluetooth Driver Installation 1. Make sure the module is powered on, then insert the Device Drivers & Utili- The use of any portable electronic transmission de- ties + User’s Manual CD-ROM(WinXP) into the CD/DVD drive.
  • Page 187 Windows XP Information User Guide View the BlueSoleil User Guides (Contents and In- dex) from the Help menu (or press the F1 key) in Corporation BlueSoleil - Main Win- dow control panel. Click BlueSoleil User Guides in the Contents tab, and click to select the appro- priate User Guide from the panel on the right.
  • Page 188 Windows XP Information Bluetooth Local Area Connection Icon If you want to display the Local Area Connection icon for the Bluetooth connection in the taskbar, set it up as follows: Disconnecting 1. Access the Network Connections control panel in Windows (Start > Settings > In order to have the taskbar Network Connections OR Start >...
  • Page 189 Windows XP Information Use the Fn + F12 key combination to turn on the Bluetooth module. Run the IVT Corporation BlueSoleil program from the desktop icon or Start menu. The connection status will then be displayed. Figure D - 3 - Bluetooth Connected To disconnect click File from the IVT Corporation BlueSoleil - Main Window, and select Exit (the Local Area Connection will then display “A network cable is unplugged”).

  • Page 190: D - 32 Pc Camera Module

    Windows XP Information PC Camera Module Before installing the PC Camera driver use the Fn + F10 key combination to toggle Latest PC Camera power to the module. Driver Information Check the PC Camera CD, PC Camera Driver Installation and any accompanying in- 1.

  • Page 191: Pc Camera Audio Setup

    Windows XP Information PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double- click the Sounds &...

  • Page 192: Wlan Module

    Windows XP Information WLAN Module Before installing the Wireless LAN driver use the Fn + F11 key combination to toggle power to the module. Intel WLAN Driver Installation 1. Make sure the module is powered on, then insert the Device Drivers & Utilities + User’s Manual CD- ROM(WinXP) into the CD/DVD drive.

  • Page 193: 802.11B/G Usb Wlan Driver Installation

    Windows XP Information 802.11b/g USB WLAN Driver Installation 1. Make sure the module is powered on, then insert the Device Drivers & Utilities + User’s Manual CD- ROM(WinXP) into the CD/DVD drive. 2. Click Option Drivers (button). 3. Click 3.Install WLAN Driver > Yes. 4.

  • Page 194: D - 36 Tpm Security Chip

    Windows XP Information TPM Security Chip If you have included the Trusted Platform Module security chip module in your purchase option, you will have the appropriate software provided on the Device Drivers & Utilities + User’s Manual CD-ROM (WinXP). After installing the driver as per the instructions below, see “Trusted Platform Module”...

  • Page 195: Fingerprint Reader

    Windows XP Information Fingerprint Reader If you have included the fingerprint reader in your purchase option (for Model B Help & Manual computers only) you will need to install the driver as per the instructions below. Right-click the taskbar icon Make sure you have administrator’s rights to your computer, and have a Windows to bring up the menu to password enabled for full security protection.

  • Page 196: User Enrollment

    Windows XP Information User Enrollment Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon On the first run of the program you will be asked to click the button to accept the license, and then click OK. Click Next and select “Enrollment to the biometric device”, and click Finish.
  • Page 197 Windows XP Information 10. If you put a tick in the “Enable Advanced Security for the current user” tickbox you will be asked to input a PIN before continuing (choose TPM key with PIN and enable and create a backup password). 11.
  • Page 198 Windows XP Information D - 40...

Table of Contents