Steps
1. Connect the eDP cable to the connector on the camera module.
2. Adhere the eDP cable to the display back cover.
3. Adhere the conductive tape and route the eDP cable to the display back cover.
Next steps
1. Install the camera.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
display
assembly.
5. Install the
base
cover.
6. Follow the procedure in
Display back cover
Removing the display back cover
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
5. Remove the
display
panel.
6. Remove the camera.
7. Remove the
eDP
cable.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
67