Table of Contents
Advertisement
4.3. Modifying Application Settings
The following sections describe how to use the Power Management and
Environment menus to control the system input and output ports, as well
as view the status of the EMD.
4.3.1. Setting Control Options
Click Control under Power Management to display the control options for
the power and digital outputs.
The Control page shows a graphical representation of the rear panel
along with a tabular representation of the status of each power outlet A
through H and digital out- puts. Hover your mouse cursor over the inlet
or any of the outputs and click to configure them as follows:
Inlet: Specify what action is taken by the IPS-0008 when the inlet
voltage is not within limits. You can set which power outlets and
digital outputs are to be turned on or off when the inlet voltage is
not of acceptable value.
Power Status of Outlet: Configure the parameters to identify the
out- let, specify its power on/off delay, and output current threshold.
You can also manually turn the outlet on/off from this menu page.
Digital Output Status: This menu page shows the status of the
both digital outputs and lets you specify which digital output is
toggled when events occur. You can also manually change the
status of both digital outputs from this menu page.
31
Advertisement
Table of Contents
