Cellularline POWER MINI - Bluetooth Headset With Charger Case Manual

Overview

Description:

1. MF (multifunction) button
2. LED
3. USB port
4. MicroUSB charging port
5. Led Charging Case
6. USB-MicroUSB charge cable

PRELIMINARY OPERATIONS

Charging Case Charge: Charging Case has an internal battery which allows the device to be recharged without being plugged in to a mains charger. The Charging Case must therefore be charged before recharging the device batteries.
Connect the charge cable (6) to a USB port and connect the other end to the MicroUSB charging port (4); the red LED (5) will flash while charging and will become steady when recharging is complete.
Charging a phone with Charging Case: it is possible to charge a phone using Charging Case. Connect the cable supplied (6) or the cable supplied with the phone to the USB port (3). Use the phone display to keep track of the battery charge level.
Headset charging: insert the device in the Charging Case dock, charging will start automatically. The red LED (2) turns on when charging is in progress. The LED (2) turns off when charging is complete.
Pairing with your phone:Switch off Bluetooth® on the phone and remove the device from the charging case and wait for the LED (2) to start flashing quickly.
Turn on Bluetooth® on your phone to run a search for devices and select POWER MINI when it is detected.
Switching on: remove the device from the charging case or alternatively keep the MFB button (1) held down until the LED (2) flashes white (takes about 2 seconds).
Switching off: insert the device in the charging case or alternatively keep the MFB button (1) held down until the LED (2) flashes red (takes about 2 seconds).

if the earbuds or mobile phone have been turned off or placed out of range, in order to pair them again, it may be necessary to access the mobile phone menu or simply press the MFB button (1) as if you were answering a call.

USING THE DEVICE

Answering a call: if you are wearing the earbuds, briefly press the MFB button (1) or remove the device from the charging case, wait for the phone to connect and automatic answering (takes about 2 seconds).
Ending a call: briefly press the MFB button (1) or return the earbuds to the charging case.
Play/Pause: press the MF button (1)
FF: press the MFB button (1) twice
Rew: press the MFI button (1) three times
Volume adjustment: use the phone controls to adjust the volume.
Flat battery indicator:the LED (5) flashes white when the battery is flat.

HEADSET TECHNICAL SPECIFICATIONS

Bluetooth®: v5.0
Supported profiles: Headset – Handsfree – A2DP - AVRCP
Range: 10m
Bluetooth® frequency range: 2.4 GHz-2.48 GHz
Battery voltage: 3.7V
Battery capacity: 50mAh
Charging Case battery capacity: 900mAh
Micro-USB port voltage (V): 5V±0.1V
Micro-USB port current (A): 40MA
ERP output: -1.5bBm
SAR: 1.6w/kg
Autonomy in standby: 20 hours
Talk time: 3.5 hours
Playback time: 3.5 hours
Charging the earbuds: about 1.5 hours
Charging Case Charge: about 2 hrs
Weight: 45g