Cellularline TUCK - Wireless Stereo Bluetooth Headset Manual

Table of Contents

Contents

1 Description
2 PRELIMINARY OPERATIONS
3 OPERATION
4 EARBUDS TECHNICAL SPECIFICATIONS
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

Description

Touch control
Led Charging Case
MicroUSB charging socket
On/Off button for earbud charging
MicroUSB charging cable

PRELIMINARY OPERATIONS

Charge the Charging Case and earbuds before initial setup.

CONNECTION TO THE PHONE: before connecting CELLULARLINE TUCK to the phone, the connection between the two earbuds must be established. Open the flap of the Charging Case and activate the phone's Bluetooth to search for devices and select CELLULARLINE TUCK when detected.

OPERATION

Turning on: remove the devices from the charging case or keep the touch control pressed for 5 seconds
Turning off place the earbuds inside the charging case or keep the touch control pressed for 5 seconds

Answering a call: you can answer calls from both earbuds by pressing the MFB touch control once.

Ending a call: you can end calls from both earbuds by pressing the touch control once.

Play/Pause: press the touch control on one of the two earbuds once.

Voice assistant: keep the touch control pressed for 2 seconds on one of the two earbuds.

FF: press the touch control on the right earbud twice to advance to the next track.

Rew: press the touch control of the left earbud twice to return to the previous track.

LOUDSPEAKER VOLUME ADJUSTMENT: press the touch control (1) on the right earbud 3 times to increase the volume, to decrease it press the touch control on the left earbud 3 times.

LOW BATTERY INDICATOR: the red flashing of the LED indicates that the earbuds' battery charge is low.

CHARGING THE EARBUDS: insert the devices into their respective slots and close the cover door of the Charging Case, charging will start automatically. The red LED indicates charging in progress, when charging is complete, the LED will switch off.

CHARGING THE CHARGING CASE: Plug the charging cableinto any USB port and connect the connector to the MicroUSB charging socket, the LED will flash red slowly, turning green when charging is complete.
Once the charging is complete, disconnect the Charging Case from the power supply.

Reset: Reset: if there are problems with operation of the device, you can reset it to restore its initial operation.

Delete previous pairings from the Bluetooth® menu of the phone. Turn off the Bluetooth®.
Take an earphone out of the charging case and close the cover. Put on the earphone and quickly press the button 5 times. You will hear "RESET" confirming success of the procedure. Put the earphone inside the charging case.
Take an earphone out of the charging case and close the cover. Put on the earphone and quickly press the button 5 times. You will hear "RESET" confirming success of the procedure. Put the earphone inside the charging case.
Press the button on the charging case. The LED will light up.
Remove both earphones from the case. Activate the Bluetooth® on your phone and pair again.

EARBUDS TECHNICAL SPECIFICATIONS

Bluetooth:	v5
Profiles supported:	Headset – Handsfree – A2DP - AVRCP
Range:	10mt
Bluetooth Frequency Range:	2.402HZ-2.48HZ
Battery Voltage:	3.7V
Battery Capacity:	30mAh X 2
Charging Case battery capacity:	300mAh / 1.11Wh
MicroUSB port Voltage (V):	5V
MicroUSB port current (A):	1A
ERP:	5.30dBm
SAR:	< 20mW(13dBm)
Stand by Time:	150 hours
Talk Time:	about 3 hours
Play Time:	about 3 hours
Earbud charging:	about 1.5 hours
Charging Case charging:	about 1.5 hours
Weight:	41 grams