Subscribe to Our Youtube Channel
Related Manuals for HEATSTRIP THB BA Series
Summary of Contents for HEATSTRIP THB BA Series
- Page 1 Intense with Remote & App Control (THB-BA) Product Manual HEATSTRIP® Intense with Remote & App Control www.heatstrip.com.au Ph: 03 9562 3455 E: sales@thermofilm.com.au...
- Page 2 Maximum heat performance – multiple applications ® The high temperature output of the HEATSTRIP Intense with remote & app control is perfect for exposed outdoor sites, high ceilings and hard-to-heat indoor and outdoor applications. Suitable for permanent outdoor mounting, no protection needed.
- Page 3 Specifications - Australia LEAD POWER CURRENT DIMENSIONS WEIGHT MODEL LENGTH PLUG COLOUR (WATTS) (AMPS) (mm) (Kg) (mm) THB2200BA 2200 900 x 122 x 90 1000 Black THB3200BA 3200 13.3 1040 x 122 x 90 1000 Black MODEL HEATER TYPE High intensity electric radiant, infra-red overheat heater with carbon filament element.
- Page 4 ® The top diagram shows how HEATSTRIP Intense with remote & app control is recommended to be used directly over a table, while the bottom diagram indicates how to spot heat a large area.
-
Page 5: Selection Guide
• Ideal mounting location: ceiling mounted, directly above area to be heated (e.g. above a table) ® The below table outlines the coverage HEATSTRIP Intense model (in m ), based on 3 different scenarios. For example, in an outdoor area that is protected from prevailing winds by walls, café blinds etc, (e.g. outdoor enclosed) This data is based on direct overhead ceiling mounting. - Page 6 Selection are based on HEATSTRIP Intense being mounted at 2.4m from the floor in a fully enclosed undercover outdoor area.
-
Page 7: Installation Requirements
For mounting heights more than 2.8m outdoors, we recommend the use of the optional accessories to reduce the height of ® the heater to 2.3m—2.5m. This will increase the effectiveness of your HEATSTRIP . Refer to the Mounting Accessory section for more information. -
Page 8: Installation Location
Installation location — the below diagrams confirm the minimum recommended clearances. Angled Wall Installation Surface Lights, fans, and sprinklers Below Ceiling Installation 1000 min. Surface Lights, fans, and sprinklers Below... -
Page 9: Mounting Options
Mounting options ® The installation of HEATSTRIP Intense with remote & app (THB-BA) is simple and easy with the standard mounting brackets supplied. For other more challenging locations there are a range of mounting options available - refer to below diagrams. -
Page 10: Standard Mounting Brackets
Standard mounting brackets ® The HEATSTRIP Intense with remote & app control comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with pre-set angle options of parallel, 22.5° and 45°. - Page 11 MOUNTING Fix the two mounting brackets to the ceiling or wall in the desired location (refer minimum bracket centre chart). Make sure the method of fixing (bolts or screws) will be more than strong enough to support the weight of the heater, allowing for strong winds and other conditions.
- Page 12 Extension Mount Bracket ® The Extension Mount bracket allows HEATSTRIP Intense units to be lowered from high ceilings using rigid connections. The standard length options as part of the kit are 300mm, 600mm, 900mm and 1200mm. The extension mount bracket utilises components from the standard bracket kit which is supplied with each heater.
- Page 13 Remote Control Operation Receiver is located on the heater. LED / control panel Signal Transmitter • To use the remote controller, aim the transmitter to the heater. A line of sight transmission is required for the unit to function. • The controller does not have a protection rating.
- Page 14 (Make sure Wi-Fi is TuyaSmart App enabled) Connect the HEATSTRIP Heater to Once the power is switched on, hold the + button Power. (Either Plug-In or Hardwired) on the remote until the LED screen is blinking CC. Open the App and Select Device Type select “Add Device”...
- Page 15 Pair the Google device to the Google Home App Once paired, click on the Tuya Smart App Select “Me” Select “Google Assistant” Select “Link with Google Assistant” Select “Agree and link” Choose device “Select HEATSTRIP Intense with Remote & App Pairing completed...
- Page 16 Battery Warnings and information requirements The Consumer Goods (Products Containing Button/Coin Batteries) Information Standard 2020 sets out the requirements for warnings that must be provided on consumer goods that contain a button/coin battery. In addition to mandatory requirements for warnings, this information standard also includes best practice recommendations for additional safety information to include when supplying consumer goods that contain a button/coin battery.
-
Page 17: Maintenance
In case of a heater fault or damaged supply lead, the appliance should be returned to the point of purchase for return to Thermofilm for repair. Maintenance ® The HEATSTRIP is made from durable materials, however regular care and maintenance of your heater will help prolong the life of the heater. -
Page 18: Warranty Terms And Conditions
Thermofilm warrants to the original owner that HEATSTRIP® Enhance with Remote and App control products will be free from defects in materials and workman- ship for a period of 24 months for residential applications and 12 months for commercial applications, from the date of purchase in accordance with the following warranty terms and conditions.
Need help?
Do you have a question about the THB BA Series and is the answer not in the manual?
Questions and answers