Related Manuals for mercor mcr 0204
Summary of Contents for mercor mcr 0204
- Page 1 Technical and Operating Documentation User Instruction Manual mcr 0204 Smoke and Heat Exhaust Control Unit for Smoke Curtains mcr PROSMOKE FS CE Nr dok: HO.20.00601.docx rew.: B Status: Wydany...
-
Page 2: Table Of Contents
The above documents can be downloaded from the „MERCOR” S.A company website - www.mercor.com.pl Thank you for choosing the mcr 0204 control unit. We recommend you to read this User Manual with attention and to apply the recommendations therein. This will ensure smooth and reliable operation of the equipment. -
Page 3: Introduction
Instruction Manual. 2. INTRODUCTION The mcr 0204 control unit is used in smoke exhaust systems to control the operation of electrical actuators, in particular the actuators of smoke curtains mcr PROSMOKE FS CE. control panel mcr 0204 should be installed near a controllable smoke-exhausting device or in the facility monitoring room. -
Page 4: Basic Information About The Unit
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 3. BASIC INFORMATION ABOUT THE UNIT Fig. 1 Front panel of the unit. On the front panel there are diode indicators which inform the user about the unit's status. - Page 5 Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 13 12 14 Fig. 2 View of the unit's interior. On the unit module's PCB there is a RESET (1) pushbutton. It allows to cancel the alarm after the original cause of the alarm has been eliminated.
-
Page 6: Operation
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. Along the top edge of the module's PCB there are terminal strips which are used for connecting the elements of the system:... - Page 7 Automatic – depending on the type of sensors, the sensors will be automatically activated when the temperature rises or in smoke conditions. Control panel mcr 0204 is also able to receive alarm signal from an external source, e.g. fire alarm control panel through the RPO pushbuttons line.
-
Page 8: Assembly And Start Up
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 5. ASSEMBLY AND START UP Mount the unit near the devices which are meant to be controlled by the unit, using appropriate metal connectors selected in accordance with the substrate material. Note: do not drill through the unit's housing —... - Page 9 Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 3. Perform the control panel start-up in accordance with the Operation Manual (chapter 4.6). 4. Check whether the control panel remains in the normal operating state (chapter 4.1).
-
Page 10: Typical Connection Diagrams
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 7. TYPICAL CONNECTION DIAGRAMS Fig. 3 Typical configuration of smoke exhaust system with mcr 0204 unit. FP CU - fire protection control unit... -
Page 11: Service And Maintenance
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 8. SERVICE AND MAINTENANCE The technical condition of fire protection devices installed in the facility is of key importance to ensure the safety of users of this facility. The guarantee of reliable operation of the devices can only be obtained by providing regular and professional service care. - Page 12 Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. torrential rain grade IV (A )). Should it be impossible to determine the index mentioned in the previous sentence, the actual condition and the degree of damage at the place of its origin proving that it is the consequence of torrential rain will be considered.
-
Page 13: Technical Specifications
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 10. TECHNICAL SPECIFICATIONS Item Value Central type conventional Power supply voltage - basic 230 V (-15%, +10%) 50 Hz Rated power 100 VA Output voltage (power supply for actuators) 24 V=, max. -
Page 14: Declaration Of Performance
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 11. DECLARATION OF PERFORMANCE Strona 14 z 15... -
Page 15: Certificate Of Constancy Of Performance
Smoke and Heat Exhaust Control Unit mcr 0204 for Smoke Curtains mcr PROSMOKE FS CE. User Instruction Manual. 12. CERTIFICATE OF CONSTANCY OF PERFORMANCE Strona 15 z 15...
Need help?
Do you have a question about the mcr 0204 and is the answer not in the manual?
Questions and answers