Cameo ZENIT B200 User Manual page 26

LED Fre- = LED PWM frequency 800Hz /
quency
IR Remote = Activate or deacti-
Factory = Reset to factory
Reset
BATTERY RUN TIME (Runtime)
Battery life can be increased to up to 24 hours by reducing brightness accordingly (see table
Settings). Battery life is calculated with spotlight on full and 100% battery charge status. Battery
life is extended considerably if not all of the colours red, green, blue and white are activated (Full
On), instead only red, for example.
Dimmer curves
linear
DMX value
SYSTEM INFORMATION (System Info)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu
item „System Info" (observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Use the UP and DOWN controls to select the desired submenu item, and press ENTER to display
the corresponding information.
26
vate control by IR
remote control
settings
exponential
DMX value
Configuration of LED PWM frequency
1200Hz /
2000Hz /
3600Hz /
12kHz /
25kHz
On IR remote control activated
Off IR remote control deactivated
Reset Reset to factory settings:
Now! Confirm with ENTER. Cancel with MODE
logarithmic
DMX value
S-curve
DMX value