Product Information - Nuna ixxa Manual

Hide thumbs Also See for ixxa:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Product Information

Model Number:
___________________________________________________
Manufactured Date:
________________________________________________
Warranty
We have purposely designed our high-quality products so that
they can grow with both your child and your family. Because we
stand by our product, our gear is covered by a custom warranty
per product, starting from the day it was purchased. Please have
the proof of purchase, model number and manufactured date
available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the "Warranty" link on the homepage.
Contact
For replacement parts, service, or additional warranty questions,
please contact our customer service department.
info@nunababy.com
www.nunababy.com
In the United Kingdom:
infouk@nunababy.com
www.nunababy.com
NUNA International B.V.
Van der Valk Boumanweg 178 C
2352JD Leiderdorp
The Netherlands
Child Usage Requirements
This stroller seat is suitable for use with children who meet the
following requirements:
Birth to 15kg or 3 years whichever comes first.
Product Set Up
Open Stroller
1
-
Rotate the handle up to open the stroller frame. (1)
2
- Pull the seat to open it. (2) A "click" sound means the seat
is open.
Switch Seat
Please switch seat if you needed.
1
-
Press the seat release button (3)-1 and lift the seat up (3)-2.
2
- Reverse the seat, and then attach it to the frame. (4)
A "click" sound means the seat is attached completely.
Arm Bar
1
-
Align the arm bar ends with the arm bar mounts, and insert
until it clicks into place. (5)
A "click" sound means the arm bar is assembled
completely.
2
- To remove the arm bar, press the arm bar release buttons
(6)-1 and remove the arm bar (6)-2.
3
IXXA instructions
Product Use
Securing Your Child
1
-
Push the top button on the buckle (7)-1 to release the
buckle latch and remove the magnetic clips (7)-2. Place
your child in the stroller.
2
- Insert the magnetic clips into the buckle. (8)
3
- Fit the harness snugly to your child by pulling the
adjustment straps to tighten (9)-1. Then pull the waist
adjustment straps out (9)-2.
Shoulder Harness Position
1
-
The upper shoulder harness buckles can be moved up and
down for added adjustment. (10)
Make sure the harness is adjusted properly and your child
is snugly secured. The space between the child and the
shoulder harness should be about the thickness of one
finger.
Canopy
1
-
To open the canopy, pull the canopy toward the front of the
seat, and to fold, push it
back. (11)
2
- Open the zipper on the canopy for extra shade. (12)
Calf Support
The calf support has 3 use positions.
1
-
To raise calf support, push the calf support from position 1
to position 3. (13)
2
- To lower calf support, press two adjustment buttons on
the bottom of the calf support (14)-1, and rotate the calf
support downwards. (14)-2
Recline
There are 4 recline positions for the backrest.
1
-
To raise or lower the backrest, squeeze the recline
adjustment button (15)-1, and pull the backrest up or down
(15)-2.
2
- Please do not press the button (15)-3 on the middle of the
recline adjustment button when adjusting the angle for the
recline.
USE the most reclined position for new born babies.
Brake
1
-
To lock wheels, step the rear end of the brake lever
downwards. (16)
2
- To release wheels, step the front end of the brake lever
downwards. (17)
Fold
The stroller can be folded with forward facing seat or rear facing
seat or without the seat.
1
-
Fold the canopy. (18)
2
- Press the folding release button (18)-1 on the middle of the
recline adjustment button and then squeeze the recline
adjustment button (18)-2.
3
- Fold the seat. (19)
4
- Pull the folding webbing of the seat to fold the stroller. (20)
5
- The stroller can stand after folded. (21)
6
- Fold the stroller without seat on it, press the folding
buttons of the seat mounts. (22) The stroller frame can
stand after folded. (23)
Insert
1
-
To assemble the insert, place the insert over the seat, then
thread the shoulder and waist harnesses through their
respective slots. (24)
Shoulder Harness Cover and
Crotch Harness Cover
1
-
The shoulder harness cover or crotch harness cover can be
removed from the webbing. To assemble shoulder harness
cover and crotch harness cover in reverse steps. (25) - (27)
Accessories
Not all accessories are included on some models.
Post Adaptors
For Nuna infant carrier and TRIV series carry cot assembly and
usage, please refer to the infant carrier and carry cot instruction
manual.
1
-
To attach the post adapters, place the post adapters on the
seat mounts. A "click" sound means the post adapters are
attached. (28)
2
- To attach infant carrier, place the infant carrier on the
post adapters. A "click" sound means the infant carrier is
attached. (29)
3
- To attach carry cot, place the carry cot on the post
adapters. A "click" sound means the carry cot is attached.
(30)
4
- The infant carrier and carry cot angle can be adjusted with
our adjustable adaptors. (31)
5
- When used with rear facing, the letters on the post
adaptors are the same as those on the frame plastic. (32)
6
- When used with front facing, the letters on the post
adaptors are opposite to those on the frame plastic. (33)
7
- To remove the infant carrier, push the release buttons on
the infant carrier (34)-1 and lift up (34)-2.
8
- To remove carry cot, press the release buttons on the side
of the carry cot (35)-1 and lift up (35)-2.
9
- To remove the post adapters, press the adapter release
buttons (36)-1 and lift up (36)-2.
Fold the Stroller with Post Adapters
1
-
Pull the folding webbing of the post adapters to fold the
stroller. (37)
IXXA Rain Cover
Check that the canopy is completely open before attaching the
rain cover.
1
-
To assemble the rain cover, place it over the pushchair.
(38)
Detach & Assemble Soft Goods
To detach seat soft goods, follow the steps (39) - (45) as shown,
and to re-assemble seat soft goods, follow the steps above in
reverse.
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but
do not use abrasives or bleach. Do not use silicon lubricants as
they will attract dirt and grime. Do not store your stroller in a
damp place.
Clean the stroller wheels regularly with water and remove any
dirt.
To ensure long-lasting use, wipe the stroller off with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the soft goods for washing
and drying instructions.
It is normal for fabric to color from sunlight and to show wear
and tear after a long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are
torn, broken, or missing, stop using this product.
IXXA instructions
4

Advertisement

Table of Contents
loading

Table of Contents