Using The Listening Modes; Selecting Listening Modes - Onkyo TX-SR605 User Manual

Using the Listening Modes

Selecting Listening Modes

See "About the Listening Modes" on page 66 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver/AV amplifier
with a digital audio connection (coaxial or
optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver/AV amplifier
PURE AUDIO STEREO
LISTENING MODE
■ [PURE AUDIO] button (not North American
models)
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver/AV
amplifier's display is turned off and only video sig-
nals input through HDMI IN can be output. Pressing
this button again will select the previous listening
mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
]/[ ] buttons
Selecting with the Remote Controller
STEREO
SURROUND
■ [SURROUND] button
This button selects the Dolby Digital and DTS listen-
ing modes and the Neural Surround
(*North American models only).
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
LISTENING
MODE /
*
listening mode
]/[ ] buttons
61