Video Input Setup - Onkyo TX-SR605 User Manual

First Time Setup—Continued

Video Input Setup

HDMI Input Setup
If you connect a video component to HDMI IN 1 or 2,
you must assign that input to an input selector. For exam-
ple, if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you've connected your TV to the AV receiver/AV
amplifier with an HDMI cable, you can set the AV
receiver/AV amplifier so that composite video, S-Video,
and component video sources are upconverted* and out-
put by the HDMI OUT. You can set this for each input
selector by selecting the "- - -" option.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Out-
put Assign," and then press
[ENTER].
The Input/Output Assign menu
appears.
48
HDMI
IN
OUT
HDMI
]/[
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Input
3
4
5
Notes:
]
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Monitor
setting must be set to Yes (see page 47). See page 24
for more information on video signal flow and upcon-
version.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See "Digital Input Setup" on page 50.
• This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Use the Up and Down [
buttons to select "2. HDMI Input,"
and then press [ENTER].
The HDMI Input menu appears.
1–2. HDMI Input
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN 1: Select if the video component
is connected to HDMI IN 1.
IN 2: Select if the video component
is connected to HDMI IN 2.
- - -: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in "Compo-
nent Video Setup" (see
page 49).
Press the [SETUP] button.
The Setup menu closes.
]/[ ]
- - -
- - -
- - -
- - -
- - -
]/[ ]