JVC InteriArt AV-28E50SK Instructions Manual page 56

T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT.2 terminal. If not, the T-V LINK function will not
work properly.
• When connecting a T-V LINK compatible VCR to the
EXT.2 terminal, be sure to connect the decoder to the
VCR. If not, the T-V LINK function may not work prop-
erly. And then set the Decoder(EXT2) (see page 19)
function for the channel to ON to unscramble a
scrambled channel.
RGB mode
If an equipment can output the RGB signals, connect it
to the EXT.1 terminal.
EXT2S Mode
If the equipment connected to your TV set supports S-
Video (Y/C) output from Euroconnector, you can have a
better picture quality by selecting EXT2S mode and con-
necting your equipment to the EXT.2 (EXT2S) terminal
of TV. See your equipment’s booklet to check if your
equipment has such feature.
Via the RCA jacks
If you have an equipment (such as a Camcorder) which
has the RCA jacks, connect it to the EXT3 terminal
with the video and audio cables.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or
RCA jacks, connect it to the TV with an aerial cable.
For details, see the manual provided with the equip-
ment.
• To store the test signal that comes from the equip-
ment, see “Installation Menu” on page 19 and store
it to the program number 0. You can watch images
from that equipment to select the program number
which you stored the test signal.
Decoder
Cable TV offers you a wide choice of programmes. Some
of them are free, others are to be paid for by the viewer.
This means that you will need to subscribe to the broad-
casting organisation whose programmes you wish to
receive. This organisation will supply you a correspond-
ing decoder unit to allow the programmes to be un-
scrambled.
For further information ask your dealer. See also the
booklet supplied with your decoder.
Connect a decoder with an aerial socket to
the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket
to the TV
• Connect the decoder to your TV with a eurocable (RCA
Jack Cable) to EXTERNAL (RCA Jack). When your
decoder has a Euroconnector / RCA Jack you can
obtain better picture quality if you connect a eurocable
(RCA Jack Cable) to EXTERNAL (RCA Jack).
TV and Video Recorder (VCR)
• Connect the Video Recorder to the ANT (antenna in-
put) socket of the TV with the aerial cable.
• Connect the Video Recorder to the EXT.1 or EXT.2
terminal with the SCART cable.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press
“AV” button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in
AV mode.
Camera and Camcorder
To connect to the EXT3 (Front-AV) terminal
Connect your camera or camcorder to the back side of
your TV.
• Connect your equipment to the TV via VIDEO (yel-
low), AUDIO R (red) and AUDIO L (white) inputs. You
should connect the jacks to the input in the same
colour.
Connect the decoder to the video recorder
Some video recorders have a special euroconnector for
decoder.
• Connect a eurocable to the euroconnector of your de-
coder and to the special euroconnector of your video
recorder. See also the handbook of your video recorder.
• To connect your video recorder to the TV, see TV and
Video Recorder section.
If you want to connect more equipment to your TV, con-
sult your dealer.
Connecting Headphones
Use the stereo headphone socket on the right side of
your TV, to connect headphones.
- 24 -