Analogue Teletext - JVC InteriArt AV-28E50SK Instructions Manual

REGULAR:
Use to view a normal picture (4:3 aspect ratio) as this is
its original shape.
PANORAMIC:
This stretches the left and right sides of a normal pic-
ture (4:3 aspect ratio) to fill the screen, without making
the picture appear unnatural.
The top and bottom of the picture are slightly cut off.
14:9 ZOOM:
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
16:9 ZOOM:
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
16:9 ZOOMS (SUBTITLE):
This zooms up the wide picture (16:9 aspect ratio) with
subtitles to the full screen.

Analogue Teletext

Teletext is an information system that displays text on
your TV screen. Using the Teletext information system
you can view a page of information on a subject that is
available in the list of contents (index).
On screen display is not available in text mode.
Contrast, brightness or colour control is not available,
but volume control is available in text mode.
To operate Teletext
• Select a TV station on which Teletext is being trans-
mitted.
• Press (TELETEXT) “
contents (index) is displayed on the screen.
To select a page of Teletext
• Press the appropriate digit buttons for the required
Teletext page number.
The selected page number is displayed at the top left
corner of the screen. The Teletext page counter searches
until the selected page number is located, so that the
desired page is displayed on the screen.
• Press “ ” button to move the Teletext screen for-
ward one page at a time.
• Press “ ” button to move the Teletext screen back-
ward one page at a time.
To Select Index Page
• To select the page number of the index (generally page
100), press “ ” button.
Searching for a teletext page while
watching TV
• In the Teletext mode pressing “
the screen to the TV mode. In the TV mode enter a
page number using digit buttons. As you enter last
digit of page number, “
number and flash until the entered page number is
found. Then the page number will replace “
again. Now you can display this teletext page by press-
ing “ ” button.
To Select Double Height Text
• Press “ ” button for the top half of the information
page to be displayed in double height text.
• Press “ ” button again for the bottom half of the
information page to be displayed in double height text.
• Press “ ” button once more for the full page of nor-
mal height text.
- 22 -
” button. Usually the list of
” button will switch
” sign will replace the page
” sign