Selecting Country
Using
or
button select Country.
Press
or
button to select the desired coun-
try settings.
Selecting Language
Menu language can be selected by pressing
button on Language item.
Ext-2 Output
Using
or
button select Ext-2 Output.
Press
or
button to select the source which
will be given. From Ext-2 output, either EXT-1, DTV,
EXT3 or TV can be selected.
Blue Back
You can set the TV to automatically change to a blue
screen if the signal is weak or absent, or when there is
no input from an external device.
The Blue Background feature can be turned on or off
by pressing
or
4:3 Auto Aspect
You can choose one of three Zoom modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the Zoom mode for the
normal picture (4:3 aspect ratio).
Using
or
button select 4:3 Autoaspect.
Press
or
button to select a Zoom mode.
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
Press MENU button, now you are in MENU. In the
MENU, select INSTALLATION using
ton. Then enter the Installation menu by pressing
or
button.
(18
3,&785(
6281'
)($785(
,167$//$7,21
352*5$ (
ITU 6GG6U PI
QSPBS6HH@
76I9
8C6II@G
8PGPVSÃT`TU@H
9@8P9@S@YU!
A I@ÃUVI IB
T@6S8C
TUPS@
button.
or
8
!
Q6G
Selecting Programme
To select programme number, you can use
button or Digit Buttons.
Selecting Band
BAND, can be selected either C or S by pressing
or
button.
or
Selecting Channel
CHANNEL can be changed by
Digit Buttons.
For band C,
01 - 83, WEST EUROPE.
01 - 12, 21 - 69, EAST EUROPE .
01 - 17, 21 - 73, UK.
01 - 76, FRANCE.
04 - 09, FRANCE 2.
For band S,
01 - 41, for all channel tables.
Selecting Colour System
Using or button on Colour System, you can
change the colour system to PAL, SECAM or AUTO.
Note: In EXT mode, you can choose NTSC 3.58 and
NTSC 4.43 as well.
Selecting Decoder (EXT2)
You can use this mode to connect any decoder to your
TV.
Press the or buttons to turn it on or off.
When you turn Decoder on, EXT-2 output will be cho-
sen as TV mode only and any scrambled channels will
be unscrambled through decoder connected your TV
via EXT-2 output.
but-
Decoder setting should be stored separately for each
programme.
Selecting Fine Tuning
You can use the Fine Tuning process for fine adjust-
ment (after coarse adjustment), if you are not happy
with the image on the screen.
Use
or
getting the best image on the screen.
In Channel option, normally the Fine Tuning cursor is
placed at the middle on the slider, and this is indicated
with two reciprocal arrows.
Selecting Search
Using
or
Press
or
search. SEARCHING... is displayed during the search
process. Searching is stopped as soon as a station is
found or
,
- 19 -
or
button on FINE TUNING item, until
button select Search item.
button in order to start channel
,
,
buttons are pressed.
or
button or