JVC HR-J6006UM Instructions Manual page 67

PROG
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
8 9
7
0
4
1
OK
SET TAPE SPEED
7
Press SP/EP (
RETURN TO NORMAL
SCREEN
8
Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.
NUMBER "9"
ENGAGE TIMER MODE
9
Press ‰ ‰ ‰ ‰ ‰ . The VCR turns off automatically and "‰" is
displayed on the display panel.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears
on the screen. Pressing the button again makes the correspond-
ing indication disappear.
NOTES:
● To disengage the timer before recording starts, press ‰ ‰ ‰ ‰ ‰ again.
Pressing once more re-engages it.
● In case of a power failure after programming, the VCR's memory
backup keeps your selections (if the lithium battery is not
exhausted).
● Programs that start after midnight must have the next day's date.
● After timer recording is completed, the VCR's power goes off
automatically.
● You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
● If the end of tape is reached during timer recording, the
cassette is automatically ejected.
● When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Pattern 1: The program with the lower program number
Program 1
Program 2
Pattern 2: The program that is broadcast earlier will be
Program 1
Pattern 3: The program that is broadcast earlier will be
Program 1
) to set the tape speed.
will be recorded.
10:00 11:00 12:00
CH10
CH40
recorded.
10:00 11:00 12:00
CH10
Not recorded
Program 2
CH40
recorded, followed by the remaining portion of
the other program.
10:00 11:00 12:00
CH10
Program 2
Not recorded
25
EN
Not recorded
CH40