Trouble Shooting - Parkside PMS 160 C2 Translation Of The Original Instructions

Trouble Shooting

Problem
Device doesn't start
Device works with
interruptions
Motor is slowing
down and stops
Poor grinding
performance
Sanding sheet
(9) wears down
quickly
Possible Cause
Mains voltage missing
Main circuit breaker is
tripped
On/off switch (1) may be
defective
Motor faulty
Internal loose contact
On/off switch (1) is broken
Device is overloaded
through workpiece
Sanding sheet (9) unsuit-
able for the workpiece to
be processed
Worn sanding sheet
Sanding sheet (9) unsuit-
able for the workpiece to
be processed
Too much pressure applied
Error correction
Check the socket, mains cable, line,
mains plug, repairs to be carried out
by qualified electrician if necessary,
check main circuit breaker.
Repair by Customer Care
Repair by Customer Care
Reduce pressure on sander
Workpiece unsuitable
Use a suitable sanding sheet
(9) or sanding disc (see "Assem-
bling instructions")
Insert a new sanding sheet
(see "Assembling instructions")
Use a suitable sanding sheet
(9)(see "Assembling instructions")
Reduce the pressure
GB
29