Trouble Shooting - Parkside PMS 160 A1 Translation Of The Original Instructions

Trouble Shooting

Problem
Device doesn't start
Device works with
interruptions
Engine is slowing
down and stops
Poor grinding
performance
Sanding sheet
( 11/13) wears
down quickly
Possible Cause
Mains voltage missing
Main circuit breaker is
tripped
On/off switch (
be defective
Engine faulty
Internal loose contact
On/off switch (
broken
Device is overloaded
through workpiece
Sanding sheet (
unsuitable for the work-
piece to be processed
Worn sanding sheet
Sanding sheet (
unsuitable for the work-
piece to be processed
Too much pressure applied
Error correction
Check the socket, mains cable, line,
mains plug, repairs to be carried out
by qualifi ed electrician if necessary,
check main circuit breaker.
1) may
Repair by Customer Care
Repair by Customer Care
1) is
Reduce pressure on grinding tool
Workpiece unsuitable
11/13) Use a suitable sanding sheet (
11/13) or sanding disc (see "As-
sembling instructions")
Insert a new sanding sheet
(see "Assembling instructions")
Use a suitable sanding sheet
11/13)
11/13)(see "Assembling
(
instructions")
Reduce the pressure
GB IE NI CY
15