Turning On & Basic Operations; Turning On/Off The Av Receiver; Turning On; Turning Off - Onkyo TX-NR1009 Instruction Manual

Turning On & Basic Operations

Turning On/Off the AV Receiver

(North American models)
8ON/STANDBY

Turning On

1
(European and Asian models)
Set %POWER to the ON position (^) on the front panel.
The AV receiver enters standby mode.
2
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV receiver comes on, the display lights.

Turning Off

1
Press 8ON/STANDBY on the front panel.
or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
(European and Asian models)
To completely shut down the AV receiver, set %POWER to the OFF position (@).
Tip
• For details on power management settings, see "Auto Standby"
En
22
(European and Asian models)
8ON/STANDBY
%POWER
page 61).
(➔
8RECEIVER
RECEIVER