Table of Contents
Advertisement
Top Control Panel
(A) Preset Selector
Press the preset button to select one of four presets on Spark GO. These presets can also
be customized in the Spark app. The red LED indicates the preset currently in use.
Hold the Preset button to enter Tuner Mode.
(B) Music Volume
Adjusts the sound volume of Bluetooth® devices and USB audio playback.
(C ) Headphone/Line Out (3.5mm)
Plug in a pair of headphones (8 ohm - 64 ohm) with a 3.5mm jack. Note that sound will not come out of
Spark GO's main speaker when headphones are plugged in.
(D) Guitar Input
Plug in your guitar with a standard 1/4" (6.3mm) guitar cable.
(E) Guitar Volume
Adjusts the overall volume of your guitar.
03
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Spark GO and is the answer not in the manual?
Questions and answers
Как использовать spark go в качестве интерфейса
To use the Positive Grid Spark GO as an audio interface, follow these steps:
1. Connect via USB-C: Use a USB-C to USB-A or USB-C to USB-C cable, depending on your device.
2. Turn on Spark GO: Press and hold the Power/Pair button to turn it on.
3. Connect to a Computer or Device: Plug the USB cable from the Spark GO into your computer, iOS device, or any compatible device with a USB port.
4. Select as Audio Interface: In your recording or effects software (such as Bias FX2), set Spark GO as the input and output audio device.
5. Play and Record: Ensure your instrument is connected to the Spark GO and test the sound.
This setup allows the Spark GO to function as an audio interface for playing and recording guitar.
This answer is automatically generated