Factory Reset; Force Shutdown & Restart - Positive Grid Spark GO User Manual

Factory Reset

Follow the steps below to perform a factory reset. This process will reset all the four presets stored on the
Spark GO as well as its Bluetooth pairing information, Headphone/Line Out Mode, EQ Scenario, Power
Saving Setting.
1. Turn off your Spark GO.
2. Hold the Power/Pair and Preset buttons, then release the buttons when the Power Indicator turns into
white color.
3. Hold the Power/Pair or Preset button, until all four preset LEDs buttons blink once, then release the
button.
4. Spark GO will be turned off automatically when the factory reset is completed, turn it back on to start
playing.
*After the step 2, if you're not ready to perform factory reset, or tends to do it later, you can cancel the
process by tapping the Power/Pair or Preset button.
Force Shutdown & Restart
If Spark GO runs into an issue where the knobs/buttons doesn't respond anymore or freezes, or emits a
high pitched or unusual noise, follow the steps below to force shutdown and restart Spark GO.
1. Remove the USB cable on Spark GO.
2. Hold the Power/Pair button over 10 seconds.
3. Release the Power/Pair button, and hold it again to turn Spark GO on.
09