Table of Contents
Advertisement
Starting a Quick Jam
Quick Jam are backing tracks that use the same audio engine as Smart Jam with preset chord
progressions and grooves.
B
A
A. Access Quick Jam by going to the Music page, then scroll the Smart Jam/Quick Jam banner
horizontally to see the available genres; Pop, Rock, Funk and Blues. Tap into the genres to start the
backing track.
B. Tap on the left and right arrows next to the genre at the top of the page to switch between the designed
tracks for each genre.
C. Pause the track, then long press a chord to edit the chord, following the same steps as Smart Jam.
D. Tap on the Settings icon on the top right to adjust settings. The same adjustments in Smart Jam are
available here; you may adjust the tempo, turn off the bass, or transpose the track by increments of half
steps up to an octave up or down. Tap Reset to default to reset the track to its initial default state.
E. Any changes made will be automatically saved, and automatically loaded when you load up Quick Jam.
C
D
23
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Spark GO and is the answer not in the manual?
Questions and answers
Как использовать spark go в качестве интерфейса
To use the Positive Grid Spark GO as an audio interface, follow these steps:
1. Connect via USB-C: Use a USB-C to USB-A or USB-C to USB-C cable, depending on your device.
2. Turn on Spark GO: Press and hold the Power/Pair button to turn it on.
3. Connect to a Computer or Device: Plug the USB cable from the Spark GO into your computer, iOS device, or any compatible device with a USB port.
4. Select as Audio Interface: In your recording or effects software (such as Bias FX2), set Spark GO as the input and output audio device.
5. Play and Record: Ensure your instrument is connected to the Spark GO and test the sound.
This setup allows the Spark GO to function as an audio interface for playing and recording guitar.
This answer is automatically generated