Table of Contents
Advertisement
4. Installation Instruction
Please follow the reference sections in order for installation
4-1 Installation of Power Supply
To facilitate the installation, it is recommended to set the chassis upright on the table.
Required parts: power supply securing screws x 4
4-1-1 Unscrew the thumbscrews of
the side panel and detach the
panel by press the latch to
remove the side panel.
4-1-2 Place the power supply unit
into the case.
4-1-3 Secure the power supply unit
with screws from the rear of
chassis.
4-1-4 When using large power supply
unit, please disassemble the
cross bar by loosing screws.
Fasten the screws to secure the
cross bar after the power supply
installed.
4-2 Installation of Motherboard
SUMO 4192 / SUMO 4198 is compatible with the ATX / Micro ATX motherboards.
SUMO 5115 is compatible with the E-ATX / CEB / ATX / Micro ATX motherboards.
Please confirm the dimension and fixing points of the motherboard before installation.
Required parts: Copper stand offs, securing screws
4-2-1 According to motherboard
specifications, select proper
screws points, engage the copper
stand off into the corresponding
points of the motherboard tray.
4-2-2 Change the motherboard I/O
bracket at the rear of the slot
panel (typically supplied by motherboard manufactures)
4-2-3 Secure the motherboard with securing screws.
Motherboard
ATX
Micro ATX
CEB(SUMO 5115)
E-ATX(SUMO 5115)
08
English
4-1-1
4-1-3
4-2-1
Code on tray
Securing screw
A1-A9
9
U1-U9
9
E1-E8
8
E1-E12
12
4-1-2
4-1-4
4-2-2
4-2-3
Copper stand off
9
9
8
12
Advertisement
Table of Contents
