Table of Contents
Advertisement
4-9 Application of DIY Projector Bracket
Please connect the LED 4-pin power connecter to the 4-pin power connector from
power supply unit. SUMO 4192 / SUMO 4198 / SUMO 5115 is provided with extra
transparent projector panel, which can be customized into a personalized logo and
replaced with the provided "GIGABYTE" projector bracket under the front panel.
Required parts: projector film, projector bracket
4-9-1 Visit GIGABYTE website >
PC Components > Chassis >
SUMO Series, and look for the
DIY_bracket.doc
4-9-2 Print out the projector film by 1
to 1 scale (Please use a laser
printer or copy machine to print
the projector film)
4-9-3 Trim the film along the edge lines.
4-9-4 Post the trimmed film onto the
transparent projector panel at the
sticker side.
4-9-5 Change the existing projector
panel with new panel.
4-9-6 Installation completed.
4-10 Application of Security locks
SUMO 4192 / SUMO 4198 / SUMO 5115 provides with two security locks, including a
panel lock and a side panel lock Insert the key and turn 90° to lock or unlock.
4-11 Application of Foot Supports
There are four foot supports for the SUMO 4198 / SUMO 5115 to ensure the case is
firmly seated on the holding surface.
Swivel these four feet 90° to change the position.
Note: when moving, or laying down the case, please swivel the foot support to the closed position
to prevent bending the foot support.
4-12 Application of Liquid Cooling System
SUMO 4198 / SUMO 5115 fully supports GIGABYTE 3D Galaxy series liquid cooling
system (also supports most of the liquid cooling systems currently available). While
installing the liquid cooling system, please refer to it's manual in advance.
12
English
4-9-1
4-9-2
4-9-3
4-9-4
4-9-5
4-9-6
Advertisement
Table of Contents
