Table of Contents
Advertisement
3 Troubleshooting
3.1 Bale handler troubleshooting
ITEM
PROBLEM
1
Bale goes in too
quickly
2
Blockage at top
knife
Table 4: Bale handler troubleshooting
KEENAN Bale Handler Operator's Manual Supplement Rev A01 March 2022
If the bale goes into the machine too quickly, it may place an
unnecessary load on the tractor and driveline, as well as
slowing overall mixing time as the body blades are not as
efficient at chopping long fibrous material as the top knife.
Check tine buffers and tine-to-top knife gap.
On bale handler models, check tine height settings. Ensure all
feed materials are free from foreign objects before loading
them into the machine. In the unlikely event of a large blockage
occurring that prevents the machine from restarting using the
tractor, it may be necessary to enter the mixing chamber to
manually clear the blockage. Refer to the safety section of the
main manual before attempting to enter the mixing chamber.
SOLUTION
8
Advertisement
Table of Contents
