Panasonic AG-VF5P Service Manual page 22

<Lines binding completed figure at rotating eyepiece to downward>
Fix red/blue lines from
CRT by taping up the
root of the lines. Then
insert into connector of
Rear C.B.A. after coil up
1 time at the CRT.
Place lines of EVF cable by
pushing between electrolysis
condenser.
Coil up green and yellow lines
from CRT at gray line 2 times
clockwise seen from this side.
DIS - 5
Tape this place.
Tape at the root of
anode cap
(Coil 2 times).
Confirm that line does
not catch the barrier
when rotated.
Gray line must
outside of the anode
line.
be